Abstract:The wide-angle lens is widely used with the advantage of a large field of view, but it is difficult to solve the problem of large distortion. Therefore, the research on how to design a wide-angle low-distortion lens with excellent imaging quality is very meaningful. In this paper, we propose a high-performance wide-angle small distortion optical system, which has a horizontal field angle of 110 degrees and a vertical field angle of 77 degrees, focal length of 2.03mm, f number of 1.65, and a total length of 16.5mm. By introducing a non-rotational symmetric freeform surface into the last side of the wide-angle optical system and combining with several even aspheric surfaces, the f-tan(theta) distortion in the X direction is controlled to -6%similar to+1%, and the f-tan(theta) distortion in the Y direction is controlled to less than 1%. At the same time, the MTF of the system is greater than 0.35 at 125lp/mm, so that the circular image plane can better adapt to the rectangular sensor. In addition, due to the introduction of the freeform surface in the system, the change of system structure with temperature becomes more complex. We carry out thermal analysis for this surface and calculate the change of structure with temperature. Finally, we completed the athermalized design of the lens, so that the wide-angle lens can work in the range of -40 degrees C similar to+80 degrees C. This optical system has great development potential in security monitoring, UAV detection and other fields that may encounter extreme environments.

Aspherical surfaces design for extreme ultraviolet lithographic objective with correction of thermal aberration

Design of Large Field of View and High Numerical Aperture Microscope Objective

Design of Athermalized Wide-Angle Low-Distortion Lens Using Freeform Surface

Method to Design Two Aspheric Surfaces for a Wide Field of View Imaging System with Low Distortion

Study on testing larger asphericity in non-null interferometer - art. no. 68340T

The wavefront aberration analysis and testing accuracy evaluation for the large aberration aspheric system based on the best fit sphere - art. no. 68342V

The method of solving initial structure by Seidel aberration theory for extreme ultraviolet lithography objective

The Wavefront Aberration Analysis and Testing Accuracy Evaluation for the Large Aberration Aspheric System Based on the Best Fit Sphere

Aberration Correction Method for the Catadioptric Imaging System Design.

Doublet liquid variable-focus lens for spherical aberration correction

Athermal Design And Analysis Of Glass-Plastic Hybrid Lens

Simulation Of Aspheric Tolerance With Polynomial Fitting

Design of tilted and decentered anamorphic optical system based on nodal aberration control

Tatian polynomial-based annular pupil wavefront optimization method for high-NA extreme ultraviolet lithography

Symmetrical Optical Imaging System with Bionic Variable-Focus Lens for Off-Axis Aberration Correction

Third-Order Intrinsic Aberration Modification with Second-Order Accuracy Transfer of Pupil Coordinates and Extrinsic Aberration of Plane-Symmetric Optical System with a Two-Dimensional Field Light Source

Automatic Lens Splitting Optimization Algorithm Forspherical Aberration Correction

Apparatus and its principle for thermal aberration compensation

Design method of soft X-ray and vacuum ultraviolet optical system based on plane-symmetric aberration theory

Deformation control of a thermal active mirror

Optimum Electrostatic Force Control for Fabricating a Hybrid UV-curable Aspheric Lens