Abstract:For semi-active shock and vibration mitigation systems using magnetorheological energy absorbers, fail-safe performance is of particular significance if electric power is lost. At the same time, the minimization of the field-off damping force of the magnetorheological energy absorbers at high speed is also important because the damping force due to the viscous damping force at high speed becomes too excessive, and thus, the controllable dynamic range is rapidly reduced. In this article, a fail-safe magnetorheological energy absorber with dual concentric annular valves and an inner-set permanent magnet is proposed to decrease the field-off damping force while keeping an appropriate dynamic range for improving shock and vibration mitigation performance. In the magnetorheological energy absorber, the dual concentric annular valves are configured so as to decrease the baseline damping force, and magnetic activation methods using the electromagnetic coil winding and the permanent magnet are used to maintain appropriate magnetic intensity in these concentric annular valves. An initial field-on damping force is produced by the magnetic field bias generated from the inner-set permanent magnet in consideration of the failure of the electric power supply. The initial field-on damping force of the magnetorheological energy absorbers can be increased (or decreased) by applying positive (or negative) current to the electromagnetic coil winding, and thus, bidirectional controllable damping performance could be realized. After establishing the analytical damping force model of the magnetorheological energy absorber using a Bingham-plastic nonlinear fluid model, its working principle and magnetic properties are analytically validated and analyzed via electromagnetic finite element analysis. The performance of the magnetorheological energy absorber is also theoretically compared with that of a conventional magnetorheological energy absorber with a single valve with the constraint of an identical volume under different excitation velocities.

Robust Design of Magneto-Rheological (mr) Shock Absorber Considering Temperature Effects

A simulation model with numerical method and optimal control of magneto-rheological shock isolator

Optimal Design of Magnetic System for the Magnetorheological Intelligent Damper

Experimental Investigations on the Nonlinear Dynamics of Magnetorheological Dampers

Integrated Dynamic Characteristics and Application in Semi-Active Dynamic Absorber of Magneto-Rheological Fluids

Dynamic Characteristics and Modeling of A New Magnetorheological Damper for Broadband Vibration Control

Magnetorheological damper temperature characteristics and control-oriented temperature-revised model

Design and Multiobjective Optimization of Magnetorheological Damper considering the Consistency of Magnetic Flux Density

Multi-objective Optimization Design of a Magnetorheological (MR) Fluid Damper Using a Genetic Algorithm

Experimental investigation of design parameters of temperature controlled semi-active shock absorber under different currents and velocities

Analytical Modeling and Optimal Design of a MR Damper with Power Generation.

Magnetorheological dampers optimization based on surrogate model and experimental verification

Multi-objective optimization design of magnetorheological damper and vehicle handling stability performance research

Magnetorheological energy absorber with dual concentric annular valves

Magnetic circuit design of MR controller for improving the performance of the suspension

Optimal design for working clearance of rotary MRF dampers

Design and optimization of a magnetorheological damper based on B-spline curves

Effect of temperature on the mechanics of magnetorheological fluid damper

Model Analysis And Parameters Optimization Of Magnetorheological Control Valves

Design and experiment study of a novel dual-channel independent-coil magnetorheological grease damper

Numerical and Experimental Studies on Temperature Field of Rotary Mrf Dampers