Abstract:In this paper, the fault estimation and fault-tolerant control problems are addressed for a class of continuous-time switched affine systems with actuator faults and bounded disturbances. Two novel observer-based approaches are developed to address the fault estimation problem for switched affine systems. The first one refers to a dynamic proportional-integral observer design method, where the presented fault estimate constitute proportional and integral terms to enhance the accuracy of the fault estimation, the common assumption that the measurement output derivative needs to be measurable is eliminated. The second one is an intermediate variable observer, which relaxes the observer matching condition. The output estimation error feedback term is added to the intermediate variable observer to improve the estimation performance. Then, by introducing a switching multi-shifted-point-dependent Lyapunov functional, both a fault-tolerant controller and a new robust output-dependent switching law are jointly designed to compensate the fault effects in the closed-loop switched affine systems and to ensure the practical exponential stability of augmented system, where the convergence region consists of multiple regions and the center point is around some shifted points. The traditional switching quadratic Lyapunov function method is generalized by the designed method. A practical study of a DC-DC boost converter and a numerical example are provided to illustrate effectiveness and validity of the developed fault-tolerant control design method. Note to Practitioners —Power electronics are very common in practical systems, which are usually modeled as a class of switched affine systems. In real applications, faults inevitably occur, which may lead to undesirable behavior and damage to the system. Therefore, how to achieve better fault-tolerant control objectives to guarantee the normal operation of the system with faults is a hot topic. It is practically important to address the fault-tolerant control problem for switched affine systems, where actuator faults and bounded disturbances exist simultaneously. In addition, on account of the existence of affine terms, the controller synthesis of switched affine systems is more complicated than switched linear systems. Based on the special structure of switched affine systems, two kinds of novel fault observers are proposed, where the dynamic proportional-integral observer is proposed to improve the estimation accuracy and speed by utilizing the current output information, and the common supposition that the output derivative needs to be measurable is eliminated. Furthermore, to avoid the limitation of observer matching conditions, an improved intermediate variable observer is designed to estimate faults. Different from the conventional method, the intermediate variable parameters can be selected separately for the corresponding fault channel of each subsystem and the error feedback term of output estimation is added to the intermediate variable observer to enhance the estimation performance. In addition, it is challenging to design a fault-tolerant controller and an output-dependent switching law to guarantee that the augmented system is practically stable and robust to bounded disturbances. The results demonstrate that the designed fault-tolerant control scheme has a definitive practical value.

Fault Diagnosis and Fault-Tolerant Control of Photovoltaic Micro-Inverter

Fault Analysis and Fault-tolerant Design for Parallel Redundant Inverter Systems

Open-Circuit Switch Fault Diagnosis and Fault- Tolerant Control for Output-Series Interleaved Boost DC–DC Converter

L- and LCL-Filtered Grid-Tied Single-Phase Inverter Transistor Open-Circuit Fault Diagnosis Based on Post-Fault Reconfiguration Algorithms

A novel fault-tolerant Shunt Active Power Filter and its control strategy

Fault Tolerance Enhancement of the PV Module System by Improving the Topology and Control Strategy

A Survey on Fault Diagnosis and Tolerant Control of Inverters

A Novel Fault-Tolerant Control Scheme for Shunt Active Power Filter with High Reliability

Stator Inter-Turn Fault Detection in Closed-Loop Controlled Drive Based on Switching Sideband Harmonics in CMV

A Simple and Effective Open-Circuit-Fault Diagnosis Method for Grid-Tied Power Converters—A New Technique Based on Tellegen's Theorem

A Voltage Vector Residual Estimation Method Based on Current Path Tracking for T-Type Inverter Open-Circuit Fault Diagnosis

Recent developments of fault diagnosis methods for switches in three-phase inverters

Intermediate Observer-Based Fault-Tolerant Control for Continuous-Time Switched Affine Systems: Application to Power Converters

An Open-Circuit Fault Diagnosis Method for LLC Converters

Fault Diagnosis Based Machine Learning and Fault Tolerant Control of Multicellular Converter Used in Photovoltaic Water Pumping System

Current Residual Vector-Based Open-Switch Fault Diagnosis of Inverters in PMSM Drive Systems

Open-Circuit Fault Diagnosis and Fault-Tolerant Control for a Grid-Connected NPC Inverter

A Reduced-Order Observer-Based Method for Simultaneous Diagnosis of Open-Switch and Current Sensor Faults of a Grid-Tied NPC Inverter

Model Predictive Power Control for a Fault‐tolerant Grid‐connected Converter Using Reconstructed Currents

A Method Based on NGO-HKELM for the Autonomous Diagnosis of Semiconductor Power Switch Open-Circuit Faults in Three-Phase Grid-Connected Photovoltaic Inverters

Diagnosis and Tolerance of Common Electrical Faults in T-Type Three-Level Inverters Fed Dual Three-Phase PMSM Drives