Abstract:Efficiency losses in hybrid chemical vapor deposition (HCVD)‐based perovskite solar cells are systematically investigated to better understand the oxygen loss of electron transport layer, solid–gas reaction, and nucleation/growth of perovskites. The resultant solar cells yield a champion power conversion efficiency of 21.98% and 16.16% for small area solar cells and mini‐modules, respectively. The unencapsulated small‐area solar cell shows outstanding operational stability exceeding 4000 h. Hybrid chemical vapor deposition (HCVD) is a promising method for the up‐scalable fabrication of perovskite solar cells/modules (PSCs/PSMs). However, the efficiency of the HCVD‐based perovskite solar cells still lags behind the solution‐processed PSCs/PSMs. In this work, the oxygen loss of the electron transport layer of SnO2 in the HCVD process and its negative impact on solar cell device performance are revealed. As the counter‐measure, potassium sulfamate (H2KNO3S) is introduced as the passivation layer to both mitigate the oxygen loss issue of SnO2 and passivate the uncoordinated Pb2+ in the perovskite film. In parallel, N‐methylpyrrolidone (NMP) is used as the solvent to dissolve PbI2 by forming the intermediate phase of PbI2•NMP, which can greatly lower the energy barrier for perovskite nucleation in the HCVD process. The perovskite seed is employed to further modulate the kinetics of perovskite crystal growth and improve the grain size. The resultant solar cells yield a champion power conversion efficiency (PCE) of 21.98% (0.09 cm2) with a stable output performance of 21.15%, and the PCEs of the mini‐modules are 16.16% (22.4 cm2, stable output performance of 14.72%) and 12.12% (91.8 cm2). Furthermore, the unencapsulated small area device shows an outstanding operational stability with a T80 lifetime exceeding 4000 h.

Highly Stabilized Perovskite Solar Cell Prepared Using Vacuum Deposition

Efficient and Stable of Perovskite Solar Cells

A Polymerization‐Assisted Grain Growth Strategy for Efficient and Stable Perovskite Solar Cells

Thermally Stable Perovskite Solar Cells by All-Vacuum Deposition

Effective Strategy for Stabilized Perovskite Solar Cells Using Tandem Architecture

Stabilizing perovskite-substrate interfaces for high-performance perovskite modules

Highly efficient and stable inorganic CsPbBr3 perovskite solar cells via vacuum co-evaporation

High Performance Perovskite Solar Cells by Hybrid Chemical Vapor Deposition

Improved Air Stability of Perovskite Solar Cells Via Solution-Processed Metal Oxide Transport Layers

High‐Quality Subsurface Construction of Perovskite Film for Efficient and Stable Solar Cells

Efficient and Stable Perovskite Solar Cell with High Open-Circuit Voltage by Dimensional Interface Modification

Synchronous Elimination of Excess Photoinstable PbI2 and Interfacial Band Mismatch for Efficient and Stable Perovskite Solar Cells

Quadruple-Cation Wide-Bandgap Perovskite Solar Cells with Enhanced Thermal Stability Enabled by Vacuum Deposition

A holistic approach to interface stabilization for efficient perovskite solar modules with over 2,000-hour operational stability

High performance and stability of perovskite solar cells achieved through anti-solvent modulation of multi-orientation PbI 2 and stress relief

Kinetic Stabilization of the Sol-Gel State in Perovskites Enables Facile Processing of High-Efficiency Solar Cells

One-stone-for-two-birds strategy to attain beyond 25% perovskite solar cells

Enhanced stability in perovskite solar cells via room-temperature processing

Efficient and Stable Perovskite Solar Cells and Modules Enabled by Tailoring Additive Distribution According to the Film Growth Dynamics

Efficient and Thermally Stable Wide Bandgap Perovskite Solar Cells by Dual‐Source Vacuum Deposition

Holistic Strategies Lead to Enhanced Efficiency and Stability of Hybrid Chemical Vapor Deposition Based Perovskite Solar Cells and Modules