Abstract:Conventional stator–magnet moving-iron transverse-flux linear oscillatory machines (CSMTLOMs) are widely applied in directly-drive reciprocating devices due to the merits of easy fabrication and robust mover. However, in order to keep the mover vibrating at a certain resonance frequency to save the energy and enlarge the output power, they still suffer from a higher requirement on spring stiffness due to their thick and heavy mover core, which would also narrow the frequency band with a high power factor due to the large inertial energy storage of the heavy mover. Hence, to reduce the mover core weight to reduce the demand of the spring and improve the operation performance, an improved linear oscillatory machine featured by a spoke-type interior permanent magnet inner stator (ISMTLOM) is proposed. Benefiting from its separated two stators, the tangential flux in the radial plane can return through the inner stator core, so that the yoke of the mover core can be eliminated directly. Then, to analytically investigate the influence of the special axial local saturation effect, the segmental equivalent magnetic circuit (EMC) model of the ISMTLOM is established, wherein a saturation coefficient is introduced to quantitatively consider the local saturation effect on the output force. Consequently, several important size parameters are optimally selected when keeping the same outer diameter and copper loss as that of the CSMTLOM. Afterward, the three-dimension finite element algorithm (3D FEA) is adopted for the electromagnetic performance validation and comparison. Finally, it is found that the nonlinear segmental EMC corrected by the saturation coefficient can quickly predict the output force more accurately within the wide load range, and benefiting from the topology improvement, the ISMTLOM has the merits over the CSMTLOM in its smoother output force, much lighter mover core, and less demand of mechanical spring stiffness, whilst preserving the similar output force density.

Design of A Tubular Linear Oscillating Motor with A Novel Compound Halbach Magnet Array

A Novel Halbach-Type Transverse Flux Linear Oscillatory Actuator

Design of a novel moving-magnet type of linear oscillatory motor

Design of linear oscillatory motor with two divided stators

Comparative Study of the Dual Layer Magnet Array in a Moving-Coil Tubular Linear PM Motor

Design and Analysis of a Linear-Rotary Permanent Magnet Motor with Orthogonal Windings

Design of a cylindrical moving core small linear PM oscillatory actuator

Design of Magnet Arrays for Permanent Magnetic Linear Motor

Electromagnetic Design and Analysis of a Stator–Magnet Transverse Flux Linear Oscillatory Machine with Yokeless Mover Core

Design of A Novel Permanent Magnet Linear Synchronous Motor with Segmented Armature Core for Ropeless Lifter

Optimized Design of High Torque Density Permanent Magnet Synchronous Motor with Halbach Magnet

Analysis and Optimization of a Linear Synchronous Motor with Novel Halbach Magnet Array

Modeling and Analysis of Moving-Magnet Transverse-Flux Linear Oscillatory Motor

A Novel Synchronous Permanent Magnet Linear Motor with Halbach Secondary Structure

Characteristic Analysis of an Ironless Linear Synchronous Motor with Novel Halbach Magnet Array

Performance Investigation of a Novel Multi-Tooth Switched-Flux Linear Motor

Modeling and Design Optimization of a Linear Motor with Halbach Array for Semiconductor Manufacturing Technology

Force and Torque Model of Magnetically Levitated System with 2D Halbach Array and Printed Circuit Board Coils

Characteristic Analysis and Design of a Novel Ironless Halbachmagnetized Permanent Magnet Linear Synchronous Motor

Novel inner-teeth type linear oscillatory motor with two divided stators

Research on a moving-magnet linear oscillatory actuator with double stators and its application