Abstract:MgH2, TiH2, and ZrH2 are three typical metal hydrides that have been gradually applied to composite explosives and propellants as additives in recent years. To evaluate ignition sensitivity and explosion severity, the Hartmann device and spherical pressure vessel were used to test ignition energy and explosion pressure, respectively. The results showed that the ignition sensitivity of ZrH2, TiH2 and MgH2 gradually increased. When the concentration of MgH2 is 83.0 g/m3 in Hartmann device, the ignition energy attained a minimum of 10.0 mJ. The explosion pressure of MgH2 were 1.44 times and 1.76 times that of TiH2 and ZrH2, respectively, and the explosion pressure rising rate were 3.97 times and 9.96 times that of TiH2 and ZrH2, respectively, through the spherical pressure vessel. It indicated that the reaction reactivity and reaction rate of MgH2 were higher than that of TiH2 and ZrH2. In addition, to conduct in–depth theoretical analysis of ignition sensitivity and explosion severity, gas production and combustion heat per unit mass of ZrH2, TiH2 and MgH2 were tested by mercury manometer and oxygen bomb calorimetry. The experimental results revealed that MgH2 had a relatively high gas production per unit mass (5.15 mL/g), while TiH2 and ZrH2 both had a gas production of less than 2.0 mL/g. Their thermal stability gradually increased, leading to a gradual increase in ignition energy. Furthermore, compared with theoretical combustion heat, the combustion ratio of MgH2, TiH2 and ZrH2 was more than 96.0 %, with combustion heat value of 29.96, 20.94 and 12.22 MJ/kg, respectively, which was consistent with the explosion pressure and explosion severity test results.

The Effect of the Energetic Additive Coated MgH2 on the Power of Emulsion Explosives Sensitized by Glass Microballoons

Effect of hydrogen-storage pressure on the detonation characteristics of emulsion explosives sensitized by glass microballoons

The effect of Mg(BH4)2 on the energy characteristics of RDX based aluminized explosives

Design and characterization of high-performance energetic hydrogels with enhanced mechanical and explosive properties

Study on Energy Output Characteristics of Aluminized Emulsion Explosive

Effect of metal powders on explosion of fuel-air explosives with delayed secondary igniters

Experimental study on the explosion destructive ability of magnesium powder/hydrogen hybrids in large space

Using microfluidic technology to prepare octogen high-energy microspheres containing copper-aluminum composite particles with enhanced combustion performance

High-quality and Homogeneous HMX-based Aluminized Explosives Using Droplet Microfluidic Technology

Experimental Investigation on the Enhancing Effect of Reactive Materials on Explosion Fireballs and Shock Waves of Composite Charges

Effect of emulsifiers on the thermal stability of firework propellants

Mechanism of hot‐spot formation of emulsion explosives sensitized by hydrogen‐storage glass microballoons

Improvement of the Hydrogen Storage Characteristics of MgH2 with Al Nano-Catalyst Produced by the Method of Electric Explosion of Wires

Preparation, characterization, and investigation of thermal behavior of improved HMX and RDX through coating by TNT

Hazard evaluation of ignition sensitivity and explosion severity for three typical MH2 (M= Mg, Ti, Zr) of energetic materials

Theoretical study on benzoheterocycle based energetic materials, effect of heterocyclic-fused, conjugation, hydrogen bond, and substitutional group on the detonation performance

Electrostatic spraying synthesis of energetic RDX@NGEC nanocomposites

Energetic and Protective Coating via Chemical and Physical Synergism for High Water-Reactive Aluminum Powder

Bio‐inspired Synthesis of Energetic Microcapsules Core‐Shell Structured with Improved Thermal Stability and Reduced Sensitivity via In Situ Polymerization for Application Potential in Propellants

Experimental Study of NaHCO3/modified Vermiculite Composite Powder for Methane Explosion Suppression

Core-Shell Structured HMX@Polydopamine Energetic Microspheres: Synergistically Enhanced Mechanical, Thermal, and Safety Performances