Abstract:Aluminum (Al) particles are good fuel additives to improve the energy output performances of explosives. Under detonation environment, reaction delay of Al particles plays a key role in the energy release efficiency. Up to date, reaction delay of Al particles is still limited by the efficiency of mass and heat transfer from oxidizers to Al particles. To address this issue, a homogeneous fuel-oxidizer assembly has recently become a promising strategy. In this work, oxidizer-activated Al fuel particles (ALG) were prepared with glycidyl azide polymer (GAP) as the oxidizer. The ALG was in uniform spherical shape and core-shell structure with shell layer of around 5 nm which was observed by scanning electron microscope and transmission electron microscope. The localized nanoscale mid-IR measurement detected the uniform distribution of characteristic absorption bond of GAP in the shell layer which confirmed the homogenous fuel-oxidizer structure of ALG. A thermal gravimetric analysis of ALG at ultrafast heating rate of 1000 °C/min under argon atmosphere was conducted. The decomposition of GAP finished much earlier than that of GAP at heating rate of 10 °C/min. Under ultrafast high laser fluence, the reaction response of ALG was characterized and compared with that of micro-sized Al (μAl). With the increase of laser energy, the propagation distance of the shock wave increased. However, the velocity histories were nearly the same when energies were lower than 299 mJ or higher than 706 mJ. The propagation distance of the shock wave for ALG was 0.5 mm larger than that for μAl at 2.1 μs. The underwater explosion showed the peak pressure and the shock wave energy of the ALG-based explosive were both higher than those of the μAl-based explosive at 2.5 m. This study shows the feasibility to improve the energy release of Al-based explosives via using the oxidizer-activated Al fuel particles with energetic polymer as the oxidizer.

Study on Energy Output Characteristics of Aluminized Emulsion Explosive

The Influence of Aluminum Powder Added to Emulsion Explosives on Explosion Strength

Effect of aluminum content on detonation velocity and density of emulsion explosives

Influence of Al Content and Surrounding Medium on the Energy Output of Cyclotrimethylenetrinitramine (rdx)/al/wax Explosives

Effect of Aluminum Additive on the Detonation Temperature of an Emulsion Explosive

Underwater Detonation Performance of the Aluminum Film Explosive

Influence of overdriven detonation on the energy release of aluminized explosives in underwater explosion

Effect of Aluminum Fiber Content on the Underwater Explosion Performance of RDX‐based Explosives

Difference in underwater detonation between RDX based aluminum film and aluminum particle explosives

Underwater Detonation Behavior of Aluminum Fiber Explosive

Energy output performance of aluminized explosive containing Al/PTFE reactive materials

Performance of Aluminized Explosive for Underwater Weapon

Research on performance of aluminum-fiber explosives

Effect of Perlite Content on Performance of Emulsion Explosive in Under-Water Environment

Effect of Water-bath Heating on the Explosion Power of Emulsion Explosive

The Effect of the Energetic Additive Coated MgH2 on the Power of Emulsion Explosives Sensitized by Glass Microballoons

Energy Output and Mechanical Strength of Aluminum-Fibre-reinforced Composite Explosives

Influence of Particle Size of Aluminum Powder and Morphology of Oxidizer in Rdx Based Aluminized Explosive on the Ability of Accelerating Metal (I)

Effect of RDX Powders on Detonation Characteristics of Emulsion Explosives

Estimating energy release performance of oxidizer-activated aluminum fuel particles under ultrafast stimulus

Study on Electrical Explosion Mechanism and Ignition Characteristics of Copper and Aluminum Powder under Ignition Solid Propellant