Abstract:<p>Environmental problems caused by waste tires have become so glaring that it has attracted wide attention. This case study seeks to examine the properties of carbon black from waste tires continuous commercial scale pyrolysis. This work aims to contribute to this growing area of research by exploring the difference between the properties of products under the condition of mass production and those under the condition of laboratory scale or pilot scale production. A pyrolysis prototype, with a waste tire mass flow rate of 50–60 t d<sup>−1</sup> was constructed and introduced. Steel-included tire granulates were pyrolyzed in micro-negative pressure furnace at about 420 ± 20 °C. This kind of nonstripping, micro-negative pressure and low-temperature continuous thermal pyrolysis technology can reduce the stripping process between rubber and steel wire, reduce the requirement of equipment sealing, and improve the utilization rate of resources. All three products including pyrolytic carbon black (CBp), tire pyrolysis oil (TPO) and pyrolysis gas showed good characteristics. Pyrolysis gas had been successfully re-used for pyrolysis furnaces and dryers. The higher heating value of TPO estimated to 37–40 MJ/ kg, which was comparable to diesel fuel through further treatment. Results of proximate analysis, element analysis, XPS, FTIR, XRD and surface structure confirmed that CBp with commercial scale production showed no apparent data difference with those in other small scale research cases. The morphological changes of carbon black particles were suggested, revealing a possible internal structure of CBp aggregates in commercial scale pyrolysis. This study is an attempt to push the existing research in this field to commercial production. This work generates fresh insight into the viability of continuous commercial pyrolysis and demonstrates the feasibility of the operation, providing reference for many researchers and units who study the pyrolysis technology of waste tires with the feasibility of industrial production.</p>

Separation of Core-Shell Structured Carbon Black Nanoparticles from Waste Tires by Light Pyrolysis

Surface Characteristics of Carbon Black Produced by Pyrolysis of Used Tires

Investigation of Reinforcement of the Modified Carbon Black from Wasted Tires by Nuclear Magnetic Resonance

Influence of Pyrolytic Carbon Black Derived from Waste Tires at Varied Temperatures within an Industrial Continuous Rotating Moving Bed System

Characteristics and Chemical Treatment of Carbon Black from Waste Tires Pyrolysis

Mathematical Model for Mass and Heat Transfer in Multilevel Reactor for Pyrolysis of Used Tyres

Surface Modification of Pyrolytic Carbon Black from Waste Tires and Its Use As Pigment for Offset Printing Ink

Study on Purification of Pyrolytic Oil Derived from Pilot-scale Pyrolysis of Waste Tires in Multilevel Reactor

Porosity and surface chemistry properties of carbon blacks from pyrolysis of used tires in a pilot-scale rotary kiln

Production mechanism of high-quality carbon black from high-temperature pyrolysis of waste tire

Carbon black production characteristics and mechanisms from pyrolysis of rubbers

Recovery of carbon black from waste tire in continuous commercial rotary kiln pyrolysis reactor

High-value utilization of waste tires: A review with focus on modified carbon black from pyrolysis

Basic Properties of Pyrolysis carbon black of Waste Tyres and Application of Pyrolysis carbon black in Transition Layer Rubber of All Steel Radial Tire

Demineralization strategies of carbon black derived from pyrolysis of waste tires

Molecular Dynamics Simulation of Waste Tire Pyrolysis at High Temperature

Upgrading pyrolytic carbon-blacks (CBp) from end-of-life tires: Characteristics and modification methodologies

Chemical structure of C in carbon blacks from pyrolysis of used tires in pilot-scale rotary kiln

Thermo-oxidative exfoliation of carbon black from ground tire rubber as potential reinforcement in green tires

A novel approach of reapplication of carbon black recovered from waste tyre pyrolysis to rubber composites

Characterization of Chemically Activated Pyrolytic Carbon Black Derived from Waste Tires as a Candidate for Nanomaterial Precursor