Abstract:We present a design of a laterally tapered optical waveguide mode-size converter from super luminescent diode (SLD) to silica-based planar lightwave circuit (PLC). The mode-size converter is based on silica-based PLC. By using three dimensional semi-vectorial beam propagation methods, laterally tapered waveguides with different boundaries are simulated and compared with each other, where the factors of polarization-dependent loss and coupling loss are mainly focused on. The results show that the most influential factor for polarization-dependent loss is the ratio of the divergence angle of SLD in the horizontal direction and the vertical direction. The refractive index difference. between core layer and cladding layer, core width of endface and taper length influence coupling loss mostly, while the effect of all side boundaries is within 0.05 dB. We also investigate the SLD misalignment tolerance and wavelength bandwidth's impact on coupling loss. Furthermore, we examine the performance of the mode-size converter based on a particular SLD which has a divergence angle of 30 degrees x45 degrees. By optimizing the parameters of the tapered waveguide, the coupling efficiency is increased to 62.4% and the polarization-dependent loss is reduced to 0.035 dB. Meanwhile, it enables us to reduce the coupling loss variation to 0.05dB with core width of endface fabrication tolerance of +/- 0.5 mu m and taper length tolerance of +/- 0.5 mm. The proposed mode-size converter has been demonstrated to be well performed, implying its application in the optical transceiver module using SLD as light source and hybrid integration of III-V semiconductor waveguiding devices and PLCs.

Estimation of the Optical Loss in Bent-Waveguide Superluminescent Diodes by an Analytical Method

Optical Loss in Bent-Waveguide Superluminescent Diodes

Modeling bending losses of optical nanofibers or nanowires.

Research of Bent Waveguide Optimization

Light Propagation in Curved Silver Nanowire Plasmonic Waveguides.

Polarization Insensitive and Low-Loss Coupling Mode-Size Converter from Super Luminescent Diode to Silica-Based Planar Lightwave Circuit

Calculate and analysis curved optical waveguide with FDTD

Application of Semi-Vector Modal Solution Approach to the Calculation of Bending Loss of Optical Waveguides

Accurate Optical Optimization of Light-Emitting Diodes with Consideration of Coupling Between Purcell Factor and Transmittance Coefficient

Optimizing Design to Optical Waveguide Bend Structure

Bending Loss Calculation of a Dielectric-Loaded Surface Plasmon Polariton Waveguide Structure

Loss Reduction in Sharply Bent Optical Nanofibers by Coupling with Au Nanoparticles

Analysis on Influencing Factors of Bend Loss of Silicon-on-Insulator Waveguides

Linbo3 Based S-Bend Waveguide Variable Optical Attenuator

Reseach Progress of Bent Waveguide and Its Applications

Analysis of deep-etched, single-mode GaAs/GaAlAs optical rib waveguides using discrete spectral index method

Comparative Study of Losses in Ultrasharp Silicon-on-Insulator Nanowire Bends

A Simple and Effective Method for Calculating the Bending Loss and Phase Enhancement of a Bent Planar Waveguide

Analytical formulation for the bend-loss in single-ring hollow-core photonic crystal fibers

Modeling and analysis of p-i-n diodes for Si based waveguide devices

Impact of Lateral Leakage Loss in a Kind of Shallowly-etched Rib Waveguides on SOI with Non-rectangular Cross-section