[Influence of Air Pollution Control (APC) Systems and Furnace Type on the Characteristics of APC Residues from Municipal Solid Waste Incinerators]
Hua Zhang,Si-Yuan Yu,Li-Ming Shao,Pin-Jing He
DOI: https://doi.org/10.13227/j.hjkx.201705241
2018-01-08
Abstract:The characteristics of air pollution control (APC) residues are influenced by the furnace type, APC system, and waste composition. In this study, the characteristics of APC residues from nine municipal solid waste incineration plants (the compositions of incinerated solid waste are similar) with different furnace types and APC systems were compared.APC residues contain a great amount of Ca and Cl, and the contents of Al, Si, and Fe in the APC residues from fluidized bed incinerators are higher. The mineral compositions of APC residues are not influenced by the flue gas treatment process, but their contents vary. The contents of Cd, Pb, and Zn in the APC residues from fluidized bed incinerators are lower, while those of Cr, Ba, Cu, and Ni are greatly influenced by the APC systems, with the "grate+dry scrubber" APC residues having the lowest values. The differences in the heavy metal contents in the APC residues from two incinerators before and after the upgrading of the APC systems are not significant. The leaching toxicity of Pb in the APC residues from grate incinerators is higher than that from fluidized bed incinerators, while some elements with low contents in fluidized bed APC residues can be leached more in acetic acid buffer solution. The acid neutralization capacity of the APC residues is related to Ca content. The leaching concentrations of most heavy metals are significantly increased under strong acidity (Cd, Ni, and Zn:leachate pH < 8; Pb, Cu, and Cr:leachate pH < 4). The maximum leaching concentrations of As, Ba, Cu, Ni, and Pb in the APC residues from grate incinerators are mainly controlled by their total content. The leaching concentrations of As, Ba, Cu, Ni, and Pb in the APC residues from fluidized bed incinerators are lower than those from grate incinerators with similar metal contents, which may be due to their different chemical speciation influenced by furnace types and the complexation with Al and Fe compounds.