Abstract:The relationships between process parameters (including cooking temperature, reaction time, H factor, initial alkali charge and sulfidity) and residual alkali content in black liquor during kraft pulping of eucalyptus were systematically studied in this study. Based on these relationships, an empirical model used to quantitatively predict residual alkali content in black liquor was developed. After comparing the model predictions and 26 independent experimental data, a good correlation (R-2 = 0.951) was obtained through least square fitting, indicating the validity and reliability of this empirical model for predicting residual alkali content in black liquor during kraft pulping of eucalyptus. Furthermore, skillful integration between this model and pulp kappa number prediction model developed in our previous work results in a process control strategy for simultaneously controlling residual alkali content in black liquor and kappa number of corresponding kraft pulps. Finally, simulation results from constant residual alkali content curves demonstrated that co-regulating the parameters including H factor, initial alkali charge and sulfidity, will be an effective method to select process parameters and address specific operation requirements during controlling process of residual alkali content in black liquor, which will be helpful for efficient recovery of black liquor and partially promoting the implement of the concept of transforming a chemical pulp mill into an Integrated Forest Biorefinery (IFBR) in near future.

An Integrated Model For Caustic Ratio Prediction In The Alumina Digestion Process

A new prediction model based on the leaching rate kinetics in the alumina digestion process

Analysis and Modeling of Industrial Purified Terephthalic Acid Oxidation Process

An Intelligent Control System for Continual Carbonation Decomposition Process of Sodium Aluminate Solutions Based on Expert and Prediction Strategy

Raw Mix Slurry Quality Prediction Model Used for Alumina Sintering Production Process

Development of Integration Prediction Model for Alumina Raw Slurry Quality

Optimization method of double-stream alumina digestion process parameters

Intelligent predictive modeling of blast furnace system

Prediction Model of Slurry Ph Based on Mechanism and Error Compensation for Mineral Flotation Process

Online Measurement of Alkalinity in Anaerobic Co-Digestion Using Linear Regression Method

Modeling and Optimal-Setting Control of Blending Process in a Metallurgical Industry

An on-line prediction model based on adaptive recursive least square support vector machine for silicon-manganese alloy composition

Prediction model and in-digester control of residual alkali content in black liquor during kraft pulping of eucalyptus

An Estimation Model Of Alumina Concentration For Point-Feeding Aluminum Reduction Cells

Real-time Prediction and Simulation of Returned Materials in Blending Process of Alumina Production

A PCA-WLSSVM-Based Prediction Model for Leaching Rate and Ratio of Soda to Aluminate

Optimization of AmOn Integrative Nutrients Removal Reactor Based on Numerical Simulation

Decomposition Ratio Gradient Control Strategy for Continuous Carbonation Decomposition Process

Prediction model for alloy composition based on improved online least squares support vector machine

CSTR-based modelling for the continuous carbonation of sodium aluminate solution

Dynamic Process Modeling and Nonlinear Analysis for Alumina Carbonation Decomposition