Abstract:The quality control process for sintered ore is cumbersome and time- and money-consuming. When the assay results come out and the ratios are found to be faulty, the ratios cannot be changed in time, which will produce sintered ore of substandard quality, resulting in a waste of resources and environmental pollution. For the problem of lagging sinter detection results, Long Short-Term Memory and Genetic Algorithm-Recurrent Neural Networks prediction algorithms were used for comparative analysis, and the article used GA-RNN quality prediction model for prediction. Through correlation analysis, the chemical composition of the sintered raw material was determined as the input parameter and the physical and metallurgical properties of the sintered ore were determined as the output parameters, thus successfully establishing a GA-RNN-based sinter quality prediction model. Based on 150 sets of original data, 105 sets of data were selected as the training sample set and 45 sets of data were selected as the test sample set. The results obtained were compared to the real value with an average prediction error of 1.24% for the drum index, 0.92% for the low-temperature reduction chalking index (RDI), 0.95% for the reduction index (RI), 0.40% for the load softening temperature T10%, and 0.43% for the load softening temperature T40%, with all within the running time thresholds. The study of this model enables the prediction of the quality of sintered ore prior to sintering, thus improving the yield of sintered ore, increasing corporate efficiency, saving energy, and reducing environmental pollution.

Raw Mix Slurry Quality Prediction Model Used for Alumina Sintering Production Process

Development of Integration Prediction Model for Alumina Raw Slurry Quality

Blending Expert System for Raw Mix Slurry in Production of Alumina with Sintering Process

Prediction model of quality indices based-on RBF neural network in the raw slurry blending process

Modeling and Optimal-Setting Control of Blending Process in a Metallurgical Industry

A Model Study on Raw Material Chemical Composition to Predict Sinter Quality Based on GA-RNN

A Two-Stage Intelligent Optimization System for the Raw Slurry Preparing Process of Alumina Sintering Production

An Integrated Model For Caustic Ratio Prediction In The Alumina Digestion Process

Real-time Optimization under Uncertainty for the Blending Process of Alumina Production and Its Application

Intelligent Optimization of Raw Material Blending for Alumina Production with Information Uncertainty

A Self-Training-based Approach for Aluminum Alloy Casting Quality Prediction

Intelligent Optimal Control of the Raw Slurry Producing Process in the Alumina Production

An Improved Genetic Algorithm for Raw Slurry Optimal Arrangement in Alumina Process

Prediction Model of Slurry Ph Based on Mechanism and Error Compensation for Mineral Flotation Process

Model-based optimal setting control of the raw slurry multi-mill blending process

GMPLS Model for Mix Quality Prediction and Dump Control

A new prediction model based on the leaching rate kinetics in the alumina digestion process

A Genetic‐algorithm‐based Optimal Scheduling System for Full‐filled Tanks in the Processing of Starting Materials for Alumina Production

Optimal Operation Control of the Raw Slurry Blending Process Using the Case-Based Reasoning and Neural Network

An Integrated Modeling Method for Prediction of Sulfur Content in Agglomerate

Real-time Prediction and Simulation of Returned Materials in Blending Process of Alumina Production