Abstract:Background: Percutaneous cannulated cancellous lag screws internal fixation is the most used method for the cases of femoral neck fractures. However, there are some complications. We designed a new internal fixation device, self-locking cannulated compression anti-rotation blade to improve the treatment effect of femoral neck fractures. Objective: To compare the physical parameters of two internal fixation devices, self-locking cannulated compression anti-rotation blade and AO 7.3-mm cannulated screw applied to femoral neck fractures. Design, time and setting: Randomized controlled experiment was performed at the Department of Orthopaedics and Traumatology Laboratory, Peking University People's Hospital from April to July 2008. Materials: Eight pairs of cadaver femurs were from Anatomy Research Institute of Peking University Medical Department, and self-locking cannulated compression anti-rotation blade was made by Mechanology Institute, Beijing Aviation and Aerospace University. Methods: Femoral neck fracture model was made by osteotomy on eight pairs of cadaver femur and randomly divided into two groups. Area of broken end and volume of femoral head were measured. Two groups of specimens were differently fixed by self-locking cannulated compression anti-rotation blade and AO 7.3-mm cannulated screw under fluoroscopic guidance according to designed procedures. Depth of internal fixation device in femoral head was measured on X-ray after fixation, and volume of internal fixation device in femoral head were calculated. Main outcome measures: Ratio of area of cross-section of internal fixation device versus area of broken end, and ratio of volume of internal fixation versus volume of femoral head. Results: Area of broken end, ratio of area of cross-section of internal fixation device versus area of broken end, and volume of femoral head were not significantly different between two groups (P > 0.05), but ratio of volume of self-locking cannulated compression anti-rotation blade versus volume of femoral head was significantly less than AO 7.3 mm cannulated screw (P < 0.05). Conclusion: Compared with AO 7.3-mm cannulated screw, self-locking cannulated compression anti-rotation blade in treating femoral neck fracture has many advantages, such as reduction of space of internal fixation device in femoral head, reduction of quantity of internal fixation device, and reduction of manipulation difficulty, minimal invasion, and may substitute AO 7.3 mm cannulated cancellous lag screw to treat femoral neck fracture.

A Novel Guidewire Aiming Device to Improve the Accuracy of Guidewire Insertion in Femoral Neck Fracture Surgery Using Cannulated Screw Fixation.

Design and clinical application of an aiming device for the placement of cannulated screws guide pins in femoral neck

Accurate Placement of Cannulated Screws in Femoral Neck Fractures: Screw and Guide Wire Combined Technique

Improve the Efficiency of Surgery for Femoral Shaft Fractures with A Novel Instrument: A Randomized Controlled Trial.

[Study on biomechanical stability in simulated femoral neck fracture fixation by two cannulated screws].

Application of U-shaped Transdermal Surgical Navigator Based on Three-Dimensional Reverse Design in Cannulated Screwing for Femoral Neck Fracture

Accuracy of guide wire placement for femoral neck stabilization using 3D printed drill guides

Comparison of physical parameters of two internal fixation devices for femoral neck fractures

The positional consistency between guidewire and cannulated or solid screw in robot-assisted spinal internal fixation surgery

Biomechanical analysis of a new cannulated screw for unstable femoral neck fractures

Design and Clinical Application of a Reduction and Nailing-Guide Instrument in Closed Reduction and Internal Fixation of Femoral Shaft Fracture with Intramedullary Nails

A comparison of conventional guidewire alignment jigs with imageless computer navigation in hip resurfacing arthroplasty

The virtual isocentric aiming device: a new mechanical targeting concept

Preclinical evaluation of a prototype freehand drill video guidance system for orthopedic surgery

[Development and clinical application of an adjustable digital cannulated nail guide based on Mimics software].

Short-Term Clinical Efficacy of Femoral Neck System Versus Multiple Cannulated Compression Screws in the Treatment of Garden III and IV Femoral Neck Fractures

Enhanced Interfragmentary Stability and Improved Clinical Prognosis with Use of the Off-Axis Screw Technique to Treat Vertical Femoral Neck Fractures in Nongeriatric Patients

Biomechanical Evaluation of a New Device for Internal Fixation of Femoral Neck Fractures

How to get better TAD? Relationship between anteversion angle of nail and position of femoral neck guide pin during nailing of intertrochanteric fractures

A clinical study on robot navigationassisted intramedullary nail treatment for humeral shaft fractures

A Novel Patient-Specific Three-Dimensional Printing Template Based on External Fixation for Pelvic Screw Insertion.