Abstract:Background: The goal of stabilization of the femoral neck is to limit morbidity and mortality from fracture. Of three potential methods of fixation, (three percutaneous screws, the Synthes Femoral Neck System, and a dynamic hip screw), each requires guide wire positioning of the implant(s) in the femoral neck and head. Consistent and accurate positioning of these systems is paramount to reduce surgical times, stabilize fractures effectively, and reduce complications. To help expedite surgery and achieve ideal implant positioning in the geriatric population, we have developed and validated a surgical planning methodology using 3D modelling and printing technology. Methods: Using image processing software, 3D surgical models were generated placing guide wires in a virtual model of an osteoporotic proximal femur sawbone. Three unique drill guides were created to achieve the optimal position for implant placement for each of the three different implant systems, and the guides were 3D printed. Subsequently, a trauma fellowship trained orthopedic surgeon used the 3D printed guides to position 2.8 mm diameter drill bit tipped guide wires into five osteoporotic sawbones for each of the three systems (fifteen sawbones total). Computed Tomography (CT) scans were then taken of each of the sawbones with the implants in place. 3D model renderings of the CT scans were created using image processing techniques and the displacement and angular deviations at guide wire entry to the optimal sawbone model were measured. Results: Across all three percutaneous screw guide wires, the average displacement was 3.19 ± 0.12 mm and the average angular deviation was 4.10 ± 0.17o. The Femoral Neck System guide wires had an average displacement of 1.59 ± 0.18 mm and average angular deviation of 2.81 ± 0.64o. The Dynamic Hip Screw had an average displacement of 1.03 ± 0.19 mm and average angular deviation of 2.59 ± 0.39o. Conclusion: The use of custom 3D printed drill guides to assist with the positioning of guide wires proved to be accurate for each of the three types of surgical strategies. Guides which are used to place more than 1 guide wire may have lower positional accuracy, as the guide may shift during multiple wire insertions. We believe that personalized point of care drill guides provide an accurate intraoperative method for positioning implants into the femoral neck.

The virtual isocentric aiming device: a new mechanical targeting concept

Accuracy of dental implant surgery with robotic position feedback and registration algorithm: An <i>in</i>-<i>vitro</i> study

Preclinical evaluation of a prototype freehand drill video guidance system for orthopedic surgery

2D projection-based software application for mobile C-arms optimises wire placement in the proximal femur - An experimental study

Image guidance can support scaphoid K-wire insertion: an experimental study and initial clinical experience

Computer-assisted LISS Plate Osteosynthesis of Proximal Tibia Fractures: Feasibility Study and First Clinical Results.

Reality-augmented Virtual Fluoroscopy for Computer-Assisted Diaphyseal Long Bone Fracture Osteosynthesis: A Novel Technique and Feasibility Study Results

On the accuracy of a video-based drill-guidance solution for orthopedic and trauma surgery: preliminary results

Image-Guided Robotic K-Wire Placement for Orthopaedic Trauma Surgery

Influence of the Vertek aiming device on the surgical accuracy of computer-assisted drilling of the equine distal sesamoid bone-An experimental cadaveric study

Experimental and virtual testing of bone-implant systems equipped with the AO Fracture Monitor with regard to interfragmentary movement

A Novel Guidewire Aiming Device to Improve the Accuracy of Guidewire Insertion in Femoral Neck Fracture Surgery Using Cannulated Screw Fixation.

StraightTrack: Towards Mixed Reality Navigation System for Percutaneous K-wire Insertion

Navigated treatment of metatarsal V fractures using a new image based guidance system

Accuracy of guide wire placement for femoral neck stabilization using 3D printed drill guides

Surgical navigation for guidewire placement from intraoperative fluoroscopy in orthopaedic surgery

Computer-assisted, Fluoroscopy-Based Ventral Spondylodesis of Thoracolumbar Fractures

A multi-view interactive virtual-physical registration method for mixed reality based surgical navigation in pelvic and acetabular fracture fixation

Accurate and Reliable Pose Recovery of Distal Locking Holes in Computer-Assisted Intra-Medullary Nailing of Femoral Shaft Fractures: a Preliminary Study.

Kirschner Wire as a Reference Marker for the Positioning of a Syndesmotic Screw: A Radiological Study

Accuracy of Computer-Assisted Dynamic Navigation in Implant Placement with a Fully Digital Approach: A Prospective Clinical Trial