Abstract:Monocore powder-in-tube MgB2 strands were cold-drawn and heat-treated at 600C and 700C for times of up to 71 hours and structure-property relationships examined. Drawing-induced elongation of the Mg particles led, after HT, to a textured macrostructure consisting of elongated polycrystalline MgB2 fibers separated by elongated pores. The superconducting Tc, Jc and Fp were correlated with the macrostructure and grain size. Grain size increased with HT time at both 600C and 700C. Jc and hence Fp decreased monotonically but not linearly with grain size. Overall, it was observed that at 700C, the MgB2 reaction was more or less complete after as little as 30 min; at 600C, full reaction completion did not occur until 71 h. into the HT. Transport, Jct(B) was measured in a perpendicular applied field, and the magnetic critical current densities, Jcm\bot(B) and Jcm{\phi}(B), were measured in perpendicular and parallel (axial) applied fields, respectively. Particularly noticeable was the premature dropoff of Jcm\bot(B) at fields well below the irreversibility field of Jct(B). This effect is attributed to the fibrous macrostructure and its accompanying anisotropic connectivity. Magnetic measurements with the field directed along the strand axis yielded a critical density, Jcm\bot(B), for current flowing transversely to the strand axis that was less than and dropped off more rapidly than Jct(B). In the conventional magnetic measurement, the loop currents that support the magnetization are restricted by the lower of Jct(B) and Jcm{\phi} (B). In the present case the latter, leading to the premature dropoff of the measured Jcm(B) compared to Jct(B) with increasing field. This result is supported by Kramer plots of the Jcm{\phi} (B) and Jct(B) data which lead to an irreversibility field for transverse current that is very much less than the usual transport-measured longitudinal one, Birr,t.

Second-phase Segregation and Micro Strain/lattice Parameter Dependent Transition Temperature in Polycrystalline MgB2

Biaxial Strain Engineering on the Superconducting Properties of MgB2 Monolayer

Influences of Heat Treatment and Doping on Microstructure and Superconducting Properties of MgB2 Superconductor

Study on the relationship between uniaxial strain and critical transition temperature of MgB2based on first-principles

Nanoscale-SiC doping for enhancing Jc and Hc2 in the Superconducting MgB2

Study of high temperature resistivity and thermal stability of superconductor MgB2

Biaxial strain engineering on the superconducting properties of MgB2 thin film

Structural and critical current properties in Al-doped MgB2

Order-Disorder Transition and Phase Separation in the MgB2 Metallic Sublattice Induced by Al Doping

High Critical Temperature and the Resistive Transition of MgB[sub 2]

Magnetic Relaxation and Critical Current Density of the New Superconductor Mgb2

Effects of Si and C Doping on the Superconducting Properties of Mgb(2)

Two-bandgap magneto-thermal conductivity of polycrystalline MgB<sub>2</sub>

Drawing induced texture and the evolution of superconductive properties with heat treatment time in powder-in-tube in-situ processed MgB2 strands

Fabrication and Superconducting Properties of MgB2 Wires with Amorphous Carbon Doping by In-situ Powder-in-tube Method

Effect of Nano-SiC and Nano-Si Doping on Critical Current Density of MgB 2

Enhancement of the Superconducting Transition Temperature of MgB2 by a Strain-Induced Bond-Stretching Mode Softening.

Systematic effects of carbon doping on the superconducting properties of Mg(B$_{1-x}$C$_x$)$_2$

Flux Dynamics and Vortex Phase Diagram of the New Superconductor MgB2

Review of superconducting properties of MgB2

Effects of Al doping on the superconducting and structural properties of MgB2