Abstract:In this work, we quantify field emission properties of cathodes made from carbon nanotube (CNT) fibers. The cathodes were arranged in different configurations to determine the effect of cathode geometry on the emission properties. Various geometries were investigated including: 1) flat cut fiber tip, 2) folded fiber, 3) looped fiber and 4) and fibers wound around a cylinder. We employ a custom field emission microscope to quantify I-V characteristics in combination with laterally-resolved field-dependent electron emission area. Additionally we look at the very early emission stages, first when a CNT fiber is turned on for the first time which is then followed by multiple ramp-up/down. Upon the first turn on, all fibers demonstrated limited and discrete emission area. During ramping runs, all CNT fibers underwent multiple (minor and/or major) breakdowns which improved emission properties in that turn-on field decreased, field enhancement factor and emission area both increased. It is proposed that breakdowns are responsible for removing initially undesirable emission sites caused by stray fibers higher than average. This initial breakdown process gives way to a larger emission area that is created when the CNT fiber sub components unfold and align with the electric field. Our results form the basis for careful evaluation of CNT fiber cathodes for dc or low frequency pulsed power systems in which large uniform area emission is required, or for narrow beam high frequency applications in which high brightness is a must.

Field emission characteristics of carbon nanotube cold cathode by driving millisecond width pulse voltage

Electron Emission and Structure Stability of Carbon Nanotube Cold Cathode Driven by Millisecond Pulsed Voltage

Effects of Pulsewidth and Area of Carbon Nanotube Films on Their Pulsed Field Emission Characteristics

Fabrication and electrical characteristics of carbon nanotube field emission microcathodes with an integrated gate electrode

In-situ studies of electron field emission of single carbon nanotubes inside the TEM

Field-Emission Energy Distribution of Carbon Nanotube Film and Single Tube under High Current

Study of Pulsed Field Emission Characteristics and Simulation Models of Carbon Nanotube Cold Cathodes

Field Emission From Short And Stubby Vertically Aligned Carbon Nanotubes

Electron Emission from Carbon Nanotube Films under Pulsed Fields

Investigation of Pulsed Field Electron Emission from Carbon Nanotube Thin Films

Hot electron field emission via individually transistor-ballasted carbon nanotube arrays.

Achieving High-Current Carbon Nanotube Emitters

Carbon Nanotubes As Field Emission Sources

High Emission Current Density, Vertically Aligned Carbon Nanotube Mesh, Field Emitter Array

Effect of Temperature on Field Emission from a Micrometer-Long Single-Walled Carbon Nanotube

Study On Field Emission Characteristics Of Normal-Gated And Under-Gated Carbon Nanotube Cold Cathode

Carbon Nanotubes And Their Potential Field Emission Applications

Field emission microscopy of carbon nanotube fibers: evaluating and interpreting spatial emission

Thermal-assisted field emission from carbon nanotube cathode

Electronic Pulses from Pulsed Field Emission of CNT Cathodes

A Modulated Field Emission from Carbon Nanotubes Cold Cathode Cavity Resonator in L Band Frequency