Abstract:Supercritical water fluidized bed (SCWFB) is a newly developed reactor for coal and biomass gasification without releasing pollutants. The knowledge of two-phase flow properties in SCWFB is still lacked so far in literatures due to the extreme operating condition of high-pressure and high-temperature supercritical water. In this paper, a special dual-capacitance probe measurement system is developed for the extreme flow environment in SCWFB. It is found that the linear relationship is more precise in converting the capacitance of the probe sensor into local volume fraction of solids in SCWFB than Bottcher relationship. With the help of the newly-developed dual-capacitance probe measurement system, an experimental study on the bubbling fluidization in a SCWFB is carried out when the system pressure is in the range of 20-27 MPa and the system temperature is in the range of 410-570 degrees C. Four groups of quartz sands with different mean diameters which belong to Geldart type B classification are fluidized. It is found that the bed expansion method which was used in literatures to identify the onset of bubbling fluidization in supercritical carbon dioxide fluidized bed doesn't have enough precision in a SCWFB. To solve this problem, a new method of identifying the onset of bubbling fluidization in SCWFB is proposed. The minimum bubbling Reynolds number increases with the Archimedes number in a logarithmic relationship in SCWFB. At last, a new predicting correlation of the minimum bubbling fluidization velocity in SCWFB is proposed: Re-mb = 26.7091n(Ar + 10253.88) - 247.339, 1900 < Ar < 180000 The relative error of the new predicting correlation is within +/- 20% and the averaged relative error is 7.5%. The research work in this paper provides useful guidance for the optimization and operation of SCWFB reactor. (C) 2019 Elsevier Ltd. All rights reserved.

Fluidization behavior in high-pressure water at temperature from ambient to supercritical

Wavelets Analysis of Pressure Fluctuation in Agitated Fluidized Bed

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

Study on the Nature of Pressure Signals in a Bubbling Fluidized Bed

Fluidization Behavior of a High-temperature Bubbling Fluidized Bed

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions

Fluidization of Solids with Water in Supercritical Conditions – Characteristics of Pressure Fluctuations

Minimum Fluidization Velocities for Supercritical Water Fluidized Bed Within the Range of 633–693K and 23–27Mpa

Effects of Interparticle Forces on Fluidization Characteristics in Liquid-Containing and High-Temperature Fluidized Beds

Fluidization in Supercritical Water: Heat Transfer between Particle and Supercritical Water

Flow characteristics in a bubbling fluidized bed at elevated temperature

Pressure Fluctuations in a Bubbling Fluidized Bed at High Temperature

A Comparative Investigation of Flow Structures in Three-Dimensional Supercritical Water and Gas-Solid Fluidized Bed Via Two-Fluid Model Simulations

Fluidization of Particles in Supercritical Water: A Comprehensive Study on Bubble Hydrodynamics

Flow Characteristics and Defluidization Behavior with Agglomeration at High Temperature Fluidized Bed

Three-dimensional Numerical Study on Flow Dynamics Characteristics in Supercritical Water Fluidized Bed with Consideration of Real Particle Size Distribution by Computational Particle Fluid Dynamics Method

Experimental Study on Pressure Drop Characteristics of Supercritical Water Fluidized Bed

Flow Structure and Bubble Dynamics in Supercritical Water Fluidized Bed and Gas Fluidized Bed: A Comparative Study

Minimum Bubbling Fluidization Velocity in a Supercritical Water Fluidized Bed Acquired by the Dual-Capacitance Probe Method

On Coherent Structures in Gas–solid Fluidization