Abstract:A fiber magnetic field sensor with temperature compensation is put forward and experimentally verified by utilizing Fabry-Perot interferometer (FPI) and multimode interferometer (MI). The FPI with ultra-short cavity (about 20 mu m), which is proposed to improve the spectrum contrast after being filled with oil-based magnetic fluids (MF) and achieve the sensing of magnetic field, is drilled through by femtosecond laser. The FPI is composed of two sections of single mode fiber and a hollow core fiber, which is named as single mode fiber -hollow core fiber-single mode fiber (SHS). The MI composed of the coated-fiber-loop, which is only sensitive to temperature, is proposed to compensate the temperature on the sensing of magnetic field. The fiber loop is fabricated by only bending a section of coated single mode fiber (SMF). According to the experiment results, the spectrum visibility of magnetic field sensing part can be improved by 3.1 times by shortening the Fabry-Perot (FP) cavity length. The interference wavelength increases nonlinearly from 0 to 69.1 Gs while linearly from 69.1 to 137.7 Gs. In addition, its temperature sensitivity is-0.20 nm/degrees C from 23.0 to 42.9 degrees C. Moreover, the sensitivity of MI is-2.31 nm/degrees C from 23.0 to 42.9 degrees C. It could be used to compensate the temperature influence effectively. The structure boasts characteristics of simple manufacture, low cost and highly-sensitive, which can be applied in the fields of magnetic field sensing.

Magnetic Field and Temperature Sensing Based on a Macro-Bending Fiber Structure and an FBG

Simultaneous Detection of Magnetic Field and Temperature Using Micro-Nanofiber Cascaded Fiber Bragg Grating Structure

Temperature Compensated Magnetic Field Sensing Using Dual S-bend Structured Optical Fiber Modal Interferometer Cascaded with Fiber Bragg Grating.

Fiber Optic Fabry-Perot Magnetic Field Sensor with Temperature Compensation Using a Fiber Bragg Grating

Simultaneous Measurement of Magnetic Field and Temperature Utilizing Magnetofluid-Coated SMF-UHCF-SMF Fiber Structure

Temperature compensated magnetic field sensor based on magnetic fluid infiltrated cascaded structure of micro-tapered long-period fiber grating and fiber Bragg grating

Temperature Compensated Three-Dimension Fiber Optic Vector Magnetic Field Sensor Based on an Elliptical Core Micro Fiber Bragg Grating.

Simultaneous Measurement of Magnetic Field and Temperature Based on SMF-MMF-SMF-HCF-SMF Fiber Structure

Temperature Insensitive Magnetic Field Sensor Based On An Etched Tcfmi Cascaded With A Fbg

Simultaneous measurement of magnetic field and temperature based on an etched TCFMI cascaded with an FBG

Magnetic field and temperature dual-parameter sensor based on magnetic fluid materials filled photonic crystal fiber

Temperature Compensated Magnetic Field Sensor Using Magnetic Fluid Filled Exposed Core Microstructure Fiber

Dual-parameter fiber sensor based on Fabry-Pérot cavity cascaded with Terfenol-D rod integrated fiber Bragg grating

Simultaneous Measurement Of Temperature And Magnetic Field Based On A Long Period Grating Concatenated With Multimode Fiber

Temperature-compensated Optical Fiber Magnetic Field Sensor with Cascaded Femtosecond Laser Micromachining Hollow Core Fiber and Fiber Loop

Micro-bending Sensing Based on Single-Mode Fiber Spliced Multimode Fiber Bragg Grating Structure

Simultaneous measurement of temperature and bend by using an eccentric core fiber Bragg grating cascaded with a Fabry-Perot cavity

Magnetic field sensor based on concatenation of fiber peanut and long-period fiber grating with resolved temperature cross sensitivity

Magnetic Field and Temperature Sensor Based on D-shaped Photonic Crystal Fiber

Research on Simultaneous Measurement of Magnetic Field and Temperature Based on Petaloid Photonic Crystal Fiber Sensor.

Design of a Sensitivity-Enhanced Optical Fiber Magnetic Field Sensor Based on Magnetostrictive Composite