Abstract:The shell-and-plate heat exchanger is a completely welded heat exchanger that combines the best features of a shell-and-tube heat exchanger with a plate heat exchanger. The flow between the circular corrugated plates behaves as a first expanding then converging flow, leading to the intricate nature of flow structures, flow resistance, and phase-change heat transfer. The present paper numerically investigates the flow behaviors and heat transfer characteristics in the channel between the circular corrugated plates of 0.2 m in diameter, 0.0022 in corrugation depth, and 75 degrees in corrugation angle. In the simulation, the gas velocity ranges from 0.25-6.00 m/s while the liquid velocity from 0.01-0.20 m/s. The wall is set as adiabatic and constant temperature condition of 350 K, respectively. For the single-phase flow, a longitudinal spiral flow along the main flow direction is formed, and the local velocity at the edge of the circular plate is generally higher and more turbulent than that in the central area. Additionally, the increase of Reynolds number leads to a more significant pressure drop but an apparent heat transfer enhancement. Based on the analysis of the friction factor and Nusselt number with Reynolds number, the empirical correlations for predicting the flow resistance and heat transfer characteristics in the channel are proposed. For the two-phase flow, we employed the VOF model to investigate the distribution of the phases in the downward flows. Compared with the experimental data, the numerical results are demonstrated to provide an accurate analysis of the phases distribution, particularly in the cross section of the channel. Accordingly, the flow patterns in the downward two-phase flows are identified as bubbly flow, slug flow, film flow, and churn flow. Based on the variation of the averaged void fraction, the film flow can be identified as alpha > 0.8 while bubbly flow as alpha < 0.5. Additionally, the void fraction in the cross section of the flow channel along the flow direction is analyzed in detail. Since the effect of the expansion and contraction of structures will go away with an increase in the gas mass flow rate, it can be anticipated that the effect of uniform distribution is more prominent for slug flow and is negligible for film flow.

Numerical Study on Heat Transfer Enhancement in Capsule-Type Plate Heat Exchangers

Numerical Study on Hydrodynamics, Mixing and Heat Transfer of Highly Viscous Fluid in a Novel Shell-and-tube Heat Exchanger with X-type Baffles

Influence of Capsule Length and Width on Heat Transfer in Capsule-Type Plate Heat Exchangers

Heat Transfer Enhancement of Plate Heat Exchangers with Symmetrically Distributed Capsules to Generate Counter-Rotating Vortices

NUMERICAL STUDY OF FLOW AND HEAT TRANSFER CHARACTERISTICS IN SHELL-AND-PLATE HEAT EXCHANGERS

Study on Heat Transfer Synergy and Optimization of Capsule-Type Plate Heat Exchangers

Condensation Performance of Symmetrical and Parallel Capsule Plate Heat Exchangers

A numerical and experimental study of chevron, corrugated-plate heat exchangers

Flow Patterns and Pressure Drop of Downward Two-Phase Flow in a Capsule-Type Plate Heat Exchanger

Investigation on the Heat Transfer and Charge/discharge Performance of Phase Change Material Capsule Emulsion Based on Nanoparticles Enhanced Thermal Conductivity

INVESTIGATION ON HEAT TRANSFER ENHANCEMENT AND VELOCITY MATCHING IN HEAT EXCHANGERS BY USING CORRUGATED TUBES

Numerical investigation of heat transfer and fluid flow characteristics inside a wavy channel

Numerical simulation of flow and heat transfer performance of tube-shell coupled helically coiled corrugated tube heat exchanger

Numerical simulation and optimization of single-phase turbulent flow in chevron-type plate heat exchanger with sinusoidal corrugations

Heat transfer enhancement investigation in a novel flat plate heat exchanger

Numerical Study of Forced Convection over Phase Change Material Capsules in a Traditional Spherical Shape and a Biomimetic Shape

A Numerical Study on the Shell-Side Turbulent Heat Transfer Enhancement of Shell-And-Tube Heat Exchanger with Trefoil-Hole Baffles

Structural Optimization of Self-Supporting Rectangular Converging-Diverging Tube Heat Exchanger

Experimental and numerical simulation study of a novel double shell-passes multi-layer helically coiled tubes heat exchanger

Numerical Study on Flow Structure and Heat Transfer in a Circular Tube Integrated with Novel Anchor Shaped Inserts

Numerical investigation on the effect of cylindrical turbulator on performance of corrugated plate-fin heat exchanger