Abstract:This paper proposes a high temperature superconducting (HTS) double stator machine (HTS-DSM), based on the magnetic field modulation principle. In the proposed HTS-DSM, the HTS field winding and the copper armature winding are separately located on the two stators, so that it overcomes the drawbacks caused by the coupling device for cryogenic transfer, the torque tube, the carbon brushes, and slip rings in the conventional HTS synchronous machines with the rotating field winding, bringing the merits of high reliability and low maintenance cost. Moreover, a method of amounting a ferromagnetic ring outside the HTS field winding is also proposed to reduce the negative effects of the armature reaction field on the HTS field winding, since the alternating current (AC) losses induced by the armature reaction field easily cause the quench of the HTS field winding. Totally four different topologies are proposed, and the operation principle of the HTS-DSMs is analyzed based on the magnetic field modulation principle. Then the design and optimization of the HTS-DSM is discussed in detail to present the main design parameters of the four topologies. Finally, the performance of the four different topologies are compared by the finite element analysis, the results reveal that the HTS-DSM with modular dewar and iron-teeth inner stator exhibits the merits of higher power density.

A Novel Arrangement for an HTS Field Coil for Large-Capacity Superconducting Machines

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

Investigation of step-shaped field coil for large capacity superconducting motors

A Novel Arrangement of Field Coil for Large Capacity Superconducting Motors

Hts Field Coil Optimization for Large Capacity Generators

Field Coil Optimization and Characteristics Contrastive Analysis for a High-Temperature Superconducting Generator Prototype

Design of HTS Excitation Coil for Homopolar Inductor Machine Considering Critical Current Reduction of Local Turn

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Electromagnetic Design of HTS D-shaped Coils for a Toroidal-type Superconducting Magnet

Topology Analysis, Design, and Comparison of High Temperature Superconducting Double Stator Machine with Stationary Seal

Magnetic Field Distribution Around Superconducting Coils in Ferromagnetic Environment

HTS conductor coil by in-situ winding technology for large-scale high-field magnet

Analysis on charge-discharge characteristics of the high temperature superconducting coil

Design And Analysis Of A New Hts Linear Flux-Controllable Doubly Salient Machine

A Novel Coaxial Magnetic Gear Using Bulk HTS for Industrial Applications

Conceptual Design of a HTS CICC Coil for Fusion Devices based on Bi-2223 Tapes

Winding Design and Electromagnetic Analysis for A 1250-Kva Hts Transformer

Design of the HTS Permanent Magnet Motor with Superconducting Armature Winding

Optimal Design of a High Temperature Superconducting Homopolar Inductor Machine

Design and Key Performance of 2G HTS Coils for High Speed Superconducting Maglev Application

High-performance Shim Coil Design and Engineering Optimization for Use in an Extremely High Field Superconducting Magnet