A Spiro-Type Ammonium Based Switchable Dielectric Material with Two Sequential Reversible Phase Transitions above Room Temperature

Xiao-Li Wang,Lin Zhou,Qiong Ye,Fu-Juan Geng,Heng-Yun Ye,Da-Wei Fu,Yi Zhang

DOI: https://doi.org/10.1039/c6ra14157a

IF: 4.036

2016-01-01

RSC Advances

Abstract:A novel spiro-type hybrid undergoes two phase transitions at 336 and 357 K, accompanied by remarkable changes of H-bond interactions.

What problem does this paper attempt to address?

High temperature molecular-based phase transition compounds with tunable and switchable dielectric properties

Min Wan,Yan-Ning Wang,Jing-Yuan Liu,Liang Tong,Si-Yu Ye,Jun-Yi Li,Li-Zhuang Chen

DOI: https://doi.org/10.1039/d1ce01488a

IF: 3.756

2022-01-01

CrystEngComm

Abstract:Molecular-based dielectric switching compounds [ClEt-Dabco][ReO 4 ] 2 and [BrEt-Dabco][ReO 4 ] 2 with high-temperature phase transition.

chemistry, multidisciplinary,crystallography
Lead-free hybrid two-dimensional double perovskite with switchable dielectric phase transition

Tian Yang,Yi Liu,Lina Hua,Yaoyao Chen,Wuqian Guo,Haojie Xu,Xi Zeng,Changhao Gao,Wenjing Li,Junhua Luo,Zhihua Sun

DOI: https://doi.org/10.1016/j.cclet.2023.108707

IF: 9.1

2023-06-01

Chinese Chemical Letters

Abstract:Molecular dielectric switches constitute a type of intelligent materials that are highly coveted for their distinctive advantages of switchable dielectric responses, lightweight, and mechanical flexibility. Two-dimensional (2D) hybrid perovskites have demonstrated excellent promise for assembling dielectric switches, in which the dynamic motions of organic moieties afford driving force to trigger switchable dielectric phase transition. Here, we successfully assembled a new lead-free hybrid double perovskite, (CHA)4CuBiBr8 (1, CHA = cyclohexylammonium), adopting a typical 2D structural motif, which shows dielectric anisotropy and bistable behaviors during the reversible phase transition near T c = 378 K (the Curie temperature). That is, its dielectric constants could be switched and tuned between high-dielectric and low-dielectric states. Structure analyses reveal that the ordered-disordered transformation of the organic CHA+ moiety and distortion of inorganic framework account for its phase transition. This result will stimulate further exploration of molecular dielectric switches in this 2D environmentally friendly family.

chemistry, multidisciplinary
Anion‐Substituted Hybrid Zinc Halides with Remarkable Dielectric Switches

Lin Zhou,Zheng Lan Lu,Wen Feng Mo,Yu Hui Yu,Li Xia Zhai,Wenjuan Wei,Huilu Yao

DOI: https://doi.org/10.1002/chem.202403362

2024-10-30

Chemistry - A European Journal

Abstract:Thermo‐responsive dielectric switching hybrid halides, displaying reversible dielectric bistability, have recently made them highly versatile and attractive for their structural tunability and rich functional properties. However, the substantial improvement of the dielectric switching operating range is limited near room temperature, and obtaining ultra‐wide dielectric switching temperature region is a major challenge. Herein, a remarkable dielectric switching effect is reported with ultra‐wide dielectric switching temperature region in a hybrid halide system, caused by dipolar orientational polarization ascribing order‐disorder phase transitions. The new A2BX4 hybrid halide [C6H5(CH2)4NH3]2ZnBr4 (4PBA‐ZnBr4) with an ultra‐wide dielectric hysteresis loop of about 55 K near room temperature is designed successfully through halogen substitution. Meanwhile, structurally similar hybrid materials 4PBA‐ZnI4 were designed as controls. More interestingly, the crystal structure, phase transition temperature (Tc), dielectric and semiconductor properties exhibit significant discrepancies as the halogen atoms vary from Br to I. This discovery provides an efficiently regulated anionic framework to construct hybrid halides with ultra‐wide high dielectric switching and reliable cycling stability by assembling with various cations, making them potentially excellent candidates for highly responsive room temperature smart switches or transducer devices.

chemistry, multidisciplinary
High-Temperature Phase Transition Containing Switchable Dielectric Behavior, Long Fluorescence Lifetime, and Distinct Photoluminescence Changes in a 2D Hybrid CuBr 4 Perovskite

Ding-Chong Han,Yu-Hui Tan,Wei-Chao Wu,Yu-Kong Li,Yun-Zhi Tang,Jia-Chang Zhuang,Ting-Ting Ying,Hao Zhang

DOI: https://doi.org/10.1021/acs.inorgchem.1c02720

IF: 4.6

2021-12-07

Inorganic Chemistry

Abstract:A novel organic-inorganic hybrid perovskite crystal, [ClC6H4(CH2)2NH3]2CuBr4 (1), having experienced an invertible high-temperature phase transition near Tc (the Curie temperature Tc = 355 K), has been successfully synthesized. The phase-transition characteristics for compound 1 are thoroughly revealed by specific heat capacity (Cp), differential thermal analysis, and differential scanning calorimetry tests, possessing 16 K broad thermal hysteresis. Multiple-temperature powder X-ray diffraction analysis further proves the phase-transition behavior of compound 1. Moreover, compound 1 exhibits a significant steplike dielectric response near Tc, revealing that it can be deemed to be a promising dielectric switching material. The variable-temperature fluorescence experiments show distinct photoluminescence (PL) changes of compound 1. Further investigation and calculation disclose that the fluorescence lifetime of compound 1 can reach as long as 55.46 μs, indicating that it can be a potential PL material. All of these researches contribute a substitutable avenue in the design and construction of neoteric phase-transition compounds combining high Curie temperature and PL properties.

chemistry, inorganic & nuclear
Room-Temperature Phase Transition Material with Switchable Second-Order Nonlinear Optical Properties

Yan-Ling Luo,Lin Zhou,Yong-Ju Bai,Xiao-Yun Huang,Xuan Zhu,Xin Yan,Xin Deng,Yan-Juan Wang,Hui-Peng Lv,Yuan-Yuan Tang

DOI: https://doi.org/10.1021/acsami.4c03496

IF: 9.5

2024-05-07

ACS Applied Materials & Interfaces

Abstract:Phase transition materials with switchable second-order nonlinear optical (NLO) properties have attracted extensive attention because of their great application potential in photoelectric switches, sensors, and modulators, while metal-free organics with NLO switchability near room temperature remain scarce. Herein, we report a hydrogen-bonded metal-free organic crystal, 2-methylpropan-2-aminium 2,2-dimethylpropanoate (1), exhibiting a room-temperature phase transition and favorable NLO...

materials science, multidisciplinary,nanoscience & nanotechnology
Near-room-temperature Tunable Dielectric Response Induced by Dual Phase Transitions in a Lead-Free Hybrid: (C3h8n)2sbbr5

Zhihua Sun

DOI: https://doi.org/10.1039/c9ce00458k

IF: 3.756

2019-01-01

CrystEngComm

Abstract:Organic-inorganic hybrid materials, which exhibit structural diversity and rich physical properties, have shown great potential as basic device elements in the optoelectronic field. Herein, we report a new lead-free organic-inorganic hybrid compound, [C3H8N](2)SbBr5 (1, where C3H8N+ is the cyclopropylammonium cation), which demonstrates tunable dielectric responses near room temperature, derived from its two successive structural phase transitions at the vicinity of T-1 = 290 K and T-2 = 315 K, respectively. That is, its dielectric constants change from high-dielectric (above T-2), moderate-dielectric (between T-2 and T-1) and low-dielectric states (below T-1). Such dielectric behaviors coincide well with a series of reversible thermal peaks in the DSC curve. Further structural analyses reveal that the order-disorder of organic cationic moieties accounts for the phase transition at T-2, while the change of the molecular configuration provides the driving force to the phase transition at T-1. Such phase transition behaviours differ from those of the majority of previously reported dielectric phase transition materials. Moreover, theoretical calculation of the electronic band structure of 1 reveals the direct feature with a band-gap value of similar to 2.36 eV. This work affords broader design flexibility for the future exploration of electrically-ordered materials in the organic-inorganic hybrid family.
Reversible Switchability of Magnetic Anisotropy and Magnetodielectric Effect Induced by Intermolecular Motion

Shan-Nan Du,Dan Su,Ze-Yu Ruan,Ying-Qian Zhou,Wei Deng,Wei-Xiong Zhang,Young Sun,Jun-Liang Liu,Ming-Liang Tong

DOI: https://doi.org/10.1002/anie.202204700

2022-01-01

Angewandte Chemie International Edition

Abstract:AbstractIntroducing magnetic switchability into artificial molecular machines is fascinating for precise control of magnetism via external stimuli. Herein, a field‐induced CoII single‐molecule magnet was found to exhibit the reversible switch of Jahn–Teller distortion near room temperature, along with thermal conformational motion of the 18‐crown‐6 rotor, which pulls the coordinated H2O to rotate through intermolecular hydrogen bonds and triggers a single‐crystal‐to‐single‐crystal phase transition with Twarm=282 K and Tcool=276 K. Interestingly, the molecular magnetic anisotropy probed by single‐crystal angular‐resolved magnetometry revealed the reorientation of easy axis by 14.6°. Moreover, ON/OFF negative magnetodielectric effects were respectively observed in the high‐/low‐temperature phase, which manifests the spin‐lattice interaction in the high‐temperature phase could be stronger, in accompanied by the hydrogen bonding between the rotating 18‐crown‐6 and the coordinated H2O.
High-temperature giant dielectric switching in an organic–inorganic hybrid material

Jian Chen,Zhuoer Cai,Yinan Zhang,Xiaofan He,Xiu-Ni Hua,Baiwang Sun

DOI: https://doi.org/10.1039/d4dt02112f

IF: 4

2024-09-11

Dalton Transactions

Abstract:With the increasing research on giant dielectric materials, there is growing interest in the development of switching materials with giant dielectric properties. In this study, a novel organic–inorganic hybrid material (Et 3 NC 2 H 4 Br)FeCl 4 was synthesized. It was characterized through differential scanning calorimetry (DSC) and in situ temperature-dependent powder X-ray diffraction (PXRD), which determined its phase transition temperature ( T C ) to be 362 K. Temperature-dependent dielectric measurements revealed that the material exhibited switchable dielectric properties, with the real part of the dielectric constant exceeding 10 6 at 500 Hz and a dielectric switching ratio surpassing 10 3 . The ratio refers to the ratio between the high dielectric state and the low dielectric state of a step-like dielectric anomaly. Single-crystal X-ray diffraction (SCXRD) analysis confirmed that the material crystallized in the P 2 1 / c space group with a zero-dimensional structure. The optical bandgap, determined through UV-visible spectroscopy, was calculated to be 2.62 eV. Additionally, analysis using Hirshfeld surfaces and 2D fingerprint plots revealed that the predominant intermolecular interactions are H⋯Cl and H⋯H interactions. This study is anticipated to provide insights and hope for the design and application of high-temperature giant dielectric switching materials.

chemistry, inorganic & nuclear
Methylation Design Strategy to Trigger a Dual Dielectric Switch and Improve the Phase Transition Temperature

Jia Wang,Tie Zhang,Zhi-Xu Zhang,Chang-Yuan Su,Yi Zhang,Da-Wei Fu

DOI: https://doi.org/10.1021/acs.inorgchem.0c02558

IF: 4.6

2020-10-25

Inorganic Chemistry

Abstract:Phase transitions of hybrid materials have aroused widespread concern and call for an in-depth study on its structure design, because the structure and characteristics are closely related, which promote potential applications in the field of temperature sensors, dielectric switches, and actuators. However, designing materials with multiple phase transitions and a high phase transition temperature (Tr) remains a huge challenge. In order to deal with this key hurdle, we tried to regulate the structural components and successfully synthesized [MASD]2[CdCl4] (1, MASD = 8-methyl-5-azoniaspiro[4,5]decane), which displays multiple phase transitions occurring at 273.8 K and 395.9 K separately. The Tr has significantly increased compared with the parent compounds reported previously. As the temperature sensitivity of compound 1 is constant at different frequencies, it can be applied for detectors or sensors under frequency-independent or wide frequency conditions. Moreover, methylation design strategy evidently triggered the dual dielectric switch and improved the Tr, which opens a new path for finding and adjusting ideal materials of multiple phase transition.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.inorgchem.0c02558?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.inorgchem.0c02558</a>.IR spectrum, PXRD patterns, TGA curves (Figures S1–S3, respectively), crystallographic data and refinement parameters (Table S1), and bond lengths and angles (Tables S2–S4) (<a class="ext-link" href="/doi/suppl/10.1021/acs.inorgchem.0c02558/suppl_file/ic0c02558_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

chemistry, inorganic & nuclear
High-Symmetry Structural Phase Transition Triggers a Triple Switch Based on Dielectric, Nonlinear Optics, and Photoluminescence

Ran Xu,Zhi-Xu Zhang,Tie Zhang,Meng-Meng Lun,Chang-Yuan Su,Hao-Fei Ni,Da-Wei Fu,Hai-Feng Lu

DOI: https://doi.org/10.1021/acs.cgd.3c00119

IF: 4.01

2023-04-19

Crystal Growth & Design

Abstract:Organic–inorganic hybrids have attracted wide attention due to the advantages of a designable structure and adjustable function. Among these, phase-transition hybrids can exhibit a variety of properties such as switchable dielectric and optical properties due to their rich chemical adjustability, stable physical properties, and distinct structural features, thus forming stimuli-responsive multifunctional materials. However, how to achieve multifunctional coupling of hybrid materials is still a big challenge. Herein, we have successfully synthesized a phase-transition structure [FPEA]2CdCl4 (FPEA=3-fluorophenethylamine), which undergoes a first-order phase transition at a high temperature of 380.4 K. The phase transition stems from the ordered–disordered dynamic motions of protonated cations and slight distortion of the inorganic framework. Notably, the compound improves the reversible switching of both dielectric and nonlinear optical (NLO) responses. At the same time, [FPEA]2CdCl4 shows broadband luminescence with a photoluminescence quantum yield of 31.07%. The multiple responses exhibited tremendous vitality and wide scope for exploration in sensors, smart switches, light-emitting diodes, and nonlinear optical devices.

chemistry, multidisciplinary,materials science,crystallography
Successive Phase Transitions and Dual Dielectric Switching in an Organic–Inorganic Hybrid Perovskite

Lin Zhou,Rui-Xia Li,Ping-Ping Shi,Qiong Ye,Da-Wei Fu

DOI: https://doi.org/10.1021/acs.inorgchem.0c02649

IF: 4.6

2020-12-09

Inorganic Chemistry

Abstract:Molecular phase transition compounds have become a hot research area in recent years because of their potential as functional materials, such as ferroelectrics, ferroelastics, dielectric switches, etc. However, materials combining switchable dielectric properties and ferroelasticity are still rare. Here, we reported an organic–inorganic hybrid perovskite, [CPtmp][Cd(SCN)3] (1) ([CPtmp]+ is a cyclopentyltrimethylphosphonium cation), with a potential ferroelastic property. This material undergoes three structural phase transitions at 247/226, 335/312, and 349/341 K (upon heating/cooling). The successive phase transitions are mainly caused by the stepwise ordering of [CPtmp]+ cations and the concomitant deformation of [Cd(SCN)3]− anionic chains revealed by structural analyses, which triggers the double-step dielectric switching in 1 as well. These results would inspire further exploration on molecular dielectric switches with ferroelastic properties.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.inorgchem.0c02649?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.inorgchem.0c02649</a>.Detailed experimental section, table of the crystallographic data, an IR spectrum, PXRD patterns, TGA curve, packing views, Raman spectra, evolution of the domains, dielectric constant and loss, and DSC curves of compound 1 (<a class="ext-link" href="/doi/suppl/10.1021/acs.inorgchem.0c02649/suppl_file/ic0c02649_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

chemistry, inorganic & nuclear
Temperature-induced Reversible Isostructural Phase Transition in N-isopropylbenzylammonium Trifluoromethanesulfonate

Weiling Xiong,Shuquan Zhang,Chengmin Ji,Lina Li,Zhihua Sun,Cheng Song

DOI: https://doi.org/10.1016/j.inoche.2014.01.006

IF: 3.428

2014-01-01

Inorganic Chemistry Communications

Abstract:A novel organic molecular phase transition material, N-isopropylbenzylamine trifluoromethanesulfonate (1), which displays the reversible tunable dielectric behavior, has been successfully assembled by the intermolecular hydrogen-bonds. It undergoes a first-order solid-to-solid state phase transition at 189.7K (Tc), being confirmed by thermal analyses including differential scanning calorimetry (DSC), specific heat (Cp) and dielectric measurements. The dielectric constant and dielectric loss of 1 exhibit obvious anomalies and slight tunabilities triggered by heating when the temperature increases approaching to Tc. Variable-temperature single crystal X-ray diffraction demonstrates that the origin of its phase transition may be ascribed to the order–disorder transformation of trifluoromethanesulfonate anions, together with the slight twisting motions of the isopropyl groups in N-isopropylbenzylammonium cation. All the findings make us believe that 1 might be a potential phase transition material.
Three-State Dielectric Switching within a Narrow Temperature Range in Isopropylammonium Lead Iodide, a One-Dimensional Perovskite with Polar Phase

Katarzyna Fedoruk-Piskorska,Jan K. Zaręba,Szymon J. Zelewski,Anna Gągor,Mirosław Mączka,Sławomir Drobczyński,Adam Sieradzki

DOI: https://doi.org/10.1021/acsami.4c03413

IF: 9.5

2024-05-23

ACS Applied Materials & Interfaces

Abstract:The phenomenon of dielectric switching has garnered considerable attention due to its potential applications in electronic and photonic devices. Typically, hybrid organic-inorganic perovskites, HOIPs, exhibit a binary (low-high) dielectric state transition, which, while useful, represents only the tip of the iceberg in terms of functional relevance. One way to boost the versatility of applications is the discovery of materials capable of nonbinary switching schemes, such as three-state...

materials science, multidisciplinary,nanoscience & nanotechnology
Molecular Ferroelectric Piperidine‐4‐ylmethanaminium Perchlorate with Superior Switchable Dielectric Properties

Xuecheng Gan,Zheng Tang,Yan Wang,Wenjun Zhang,Xiaofan Sun,YiZhang Wu,ZhangRan Gao,Hong-Ling Cai,X. S. Wu

DOI: https://doi.org/10.1002/slct.201900081

2019-01-01

ChemistrySelect

Abstract:A new piperidyl-based molecular ferroelectric piperidine-4-ylmethanaminium perchlorate (compound 1) has been successfully synthesized, which undergoes a reversible phase transition around T-c = 258.8 K. The spontaneous polarization of compound 1 is about 0.63 mu C/cm(2) and coercive field as small as 1.14 kV/cm at 192 K. The variable-temperature single-crystal X-ray diffraction reveals that the space group transforms from a polar space group of P2(1) at 173 K to a centrosymmetric space group of P2(1)2(1)2(1) at 293 K. Especially, the dielectric anomaly at the phase transition temperature increases more than 4 times, which indicates potential applications in switchable dielectric devices.
) 4 ] 0 . 5 : A Multifunctional Molecular Switch of Dielectric , Conductivity and Magnetism

Yuan-Bo Tong,Zheng-Fang Tian,Hai-Bao Duan,Zhong-Peng Zhu,Wei He,Tian-Yu,Hong,Gui Yu,Yu-Jian He,Jing-Kui Yang

2018-01-01

Abstract:Multifunctional materials that exhibit different physical properties in a single phase have potential for use in multifunctional devices. Herein, we reported an organic-inorganic hybrid compound [(18-crown-6)K][Fe(1)Cl(1)4]0.5[Fe(2)Cl(2)4]0.5 (1) by incorporating KCl and FeCl3 into the 18-crown-6 molecular which acts as a host of the six O atoms affording lone-pair electrons to anchor the guest potassium cation, and [FeCl4] as a counter ion for charge balance to construct a complex salt. This salt exhibited a one-step reversible structural transformation to give two separate high and low temperature phases at 373 K, which was confirmed by systematic characterizations including differential scanning calorimetry (DSC) measurements, variable-temperature structural analyses, and dielectric, impedance, variable-temperature magnetic susceptibility measurements. Interestingly, the structural transformation was coupled to both hysteretic dielectric phase transition, conductivity switch and magnetic phase transition at 373 K. This novel result gives an idea for designing a new type of phase-transition materials harbouring technologically important magnetic, conductivity and dielectric properties.
Switchable Dielectric Materials Based on a Diprotonated Organic Cation Containing Two Different Anions: (C 5 H 16 N 2 )BF 4 X (X = Cl, Br, NO 3 )

Ze-Jie Wang,Ling-Kun Wu,Yan Feng,Yong Gu,Heng-Yun Ye,Jian-Rong Li

DOI: https://doi.org/10.1021/acs.cgd.3c00063

IF: 4.01

2023-03-07

Crystal Growth & Design

Abstract:Three molecular-based phase transition compounds, namely, (C5H16N2)BF4Cl (1, C5H16N2 = diprotonated 2,2-dimethyl-1,3-propanediamine), (C5H16N2)BF4Br (2), and (C5H16N2)BF4NO3 (3), were synthesized and characterized. Differential scanning calorimetry and the step-like anomaly of the real part (ε′) of the temperature-dependent dielectric constant revealed that the compounds underwent reversible first-order phase transition with high phase transition temperature under the stimulation of temperature. Variable-temperature X-ray diffraction analysis revealed that the microcosmic driving force of phase transition was the order–disordered change of the organic cation and spherical anion. Notably, the diprotonated organic cations were charge-balanced by two different anions of the combination BF4 – and Cl–, Br– and NO3 –. Our research paves a new avenue to construct molecular-based phase transition materials with temperature stimulus response.

chemistry, multidisciplinary,materials science,crystallography
Near-room-temperature dielectric switch and thermal expansion anomaly in a new hybrid crystal: 5]

Qi-Yao Li,Mao-Fan Li,Xiao-Xian Chen,Ya-Ping Gong,De-Xuan Liu,Wei-Jian Xu,Wei-Xiong Zhang

DOI: https://doi.org/10.1039/d2ce00754a

IF: 3.756

2022-06-17

CrystEngComm

Abstract:A new hybrid crystal, (Me2NH2)[CsFe(CN)5(NO)], featuring a double-layered nitroprusside-based inorganic framework with cubic-like cages encapsulating organic cations, undergoes a near-room-temperature phase transition accompanying with dielectric switch and thermal expansion anomaly. The hidden mechanism was disclosed to be highly associating with order-disorder transition of organic cations and deformation of the inorganic framework.

chemistry, multidisciplinary,crystallography
Dibenzylammonium Trichloroacetate: an Above-Room-temperature Order–disorder Switchable Dielectric Material

Siyuan Zeng,Zhihua Sun,Chengmin Ji,Shuquan Zhang,Cheng Song,Junhua Luo

DOI: https://doi.org/10.1039/c6ce00194g

IF: 3.756

2016-01-01

CrystEngComm

Abstract:Solid-state phase transition materials with a controllable dielectric response are of great interest owing to their technological importance. In the present work, a new molecular electric-ordered compound, dibenzylammonium trichloroacetate (compound 1), showing switchable and tunable dielectric properties, has been successfully synthesized and grown as bulk crystals. It is found that 1 undergoes a reversible solid-to-solid phase transition at 329 K (Tc), which was confirmed by differential scanning calorimetry (DSC), dielectric measurements and variable-temperature powder X-ray diffraction. Structural analyses reveal that intermolecular N–H⋯O hydrogen bonds connect the functional groups together and form a chain-like supramolecular architecture along the a-axis. Further, variable-temperature single-crystal X-ray diffraction discloses the order–disorder feature of its structural change, which is mainly induced by the disordering of trichloroacetate anions upon gradual heating. Moreover, the dielectric constants of 1 display a step-like anomaly around Tc, suggesting that its dielectric responses could be switched or even tuned by external temperature. It is believed that this finding might provide a possible candidate with controllable dielectric performance for potential application.
Integrated Multi‐Channel Responsive Switches in a Room‐Temperature Crystal Actuator

Ming‐Liang Jin,Xiang‐Bin Han,Cheng‐Dong Liu,Bei‐Dou Liang,Chang‐Qing Jing,Wei Wang,Chang‐Chun Fan,Tong‐Yu Ju,Jing‐Meng Zhang,Wen Zhang

DOI: https://doi.org/10.1002/adfm.202408120

IF: 19

2024-06-22

Advanced Functional Materials

Abstract:A hybrid metal halide crystal actuator is reported to show six responsive switches through a room temperature‐triggered structural phase transition, including macroscopic deformation, enthalpy, dielectric permittivity, photoluminescence, circularly polarized light excited photoluminescence, and photoelectric response. This study provides an exciting example of phase transition crystals for the development of integrated multifunctional materials. Integrating multiple switching behaviors in a single material is conducive to the development of smart devices, but still faces challenges, especially in finding new types of multiresponsive materials. Hybrid metal halides have been becoming promising candidates with the potential to exhibit changes in various physical and chemical properties upon structural phase transitions. Herein, a pair of enantiomers (R/S‐3‐OHPD)PbI3 (1R/1S; 3‐HOPD = 3‐hydroxypiperidine cation) is reported to show multichannel switching behaviors around room temperature triggered by a combined order‐disorder and displacive type phase transition that arouses a large lattice reorganization and shape change of the crystals. Owing to the inherent chiral, noncentrosymmetric, and semiconducting characteristics of the compounds, five other switching behaviors are realized besides the macroscopic deformation, that is, enthalpy, dielectric permittivity, photoluminescence, circularly polarized light excited photoluminescence, and photoelectric response. This study provides an exciting example of phase transition crystals for the development of integrated multifunctional materials.

materials science, multidisciplinary,nanoscience & nanotechnology,physics, applied,chemistry, physical, condensed matter
Reversible Phase Transition and Second-Harmonic Response Based on a Zero-Dimensional Organic–Inorganic Hybrid Compound

Jun-Miao Gong,Ting Shao,Pei-Zhi Huang,Chang-Yuan Su,Ming Chen,Da-Wei Fu,Hai-Feng Lu

DOI: https://doi.org/10.1021/acs.jpcc.2c03984

2022-08-31

The Journal of Physical Chemistry C

Abstract:The organic–inorganic hybrid materials (OIHMs) with stimuli-responsive features show the important scientific attraction in a multifunctional material application field, such as optoelectronic memory and sensors. Especially, designing a functional material with both dielectric switching and second-harmonic generation (SHG) remains attractive. Herein, we report a new OIHM [C7H15NCl] SbCl4 as a phase matching nonlinear optical material and dielectric switch functional materials. It undergoes a reversible phase transition at 297 K and exhibit a harmonic generation (SHG) effect of about 0.53 times that of KH2PO4 (KDP). Meanwhile, it also possesses potential semiconducting properties. This work might provide a strategy for designing novel multifunctional materials in the field of crystals and dielectrics.

chemistry, physical,nanoscience & nanotechnology,materials science, multidisciplinary

A Spiro-Type Ammonium Based Switchable Dielectric Material with Two Sequential Reversible Phase Transitions above Room Temperature

High temperature molecular-based phase transition compounds with tunable and switchable dielectric properties

Lead-free hybrid two-dimensional double perovskite with switchable dielectric phase transition

Anion‐Substituted Hybrid Zinc Halides with Remarkable Dielectric Switches

High-Temperature Phase Transition Containing Switchable Dielectric Behavior, Long Fluorescence Lifetime, and Distinct Photoluminescence Changes in a 2D Hybrid CuBr 4 Perovskite

Room-Temperature Phase Transition Material with Switchable Second-Order Nonlinear Optical Properties

Near-room-temperature Tunable Dielectric Response Induced by Dual Phase Transitions in a Lead-Free Hybrid: (C3h8n)2sbbr5

Reversible Switchability of Magnetic Anisotropy and Magnetodielectric Effect Induced by Intermolecular Motion

High-temperature giant dielectric switching in an organic–inorganic hybrid material

Methylation Design Strategy to Trigger a Dual Dielectric Switch and Improve the Phase Transition Temperature

High-Symmetry Structural Phase Transition Triggers a Triple Switch Based on Dielectric, Nonlinear Optics, and Photoluminescence

Successive Phase Transitions and Dual Dielectric Switching in an Organic–Inorganic Hybrid Perovskite

Temperature-induced Reversible Isostructural Phase Transition in N-isopropylbenzylammonium Trifluoromethanesulfonate

Three-State Dielectric Switching within a Narrow Temperature Range in Isopropylammonium Lead Iodide, a One-Dimensional Perovskite with Polar Phase

Molecular Ferroelectric Piperidine‐4‐ylmethanaminium Perchlorate with Superior Switchable Dielectric Properties

) 4 ] 0 . 5 : A Multifunctional Molecular Switch of Dielectric , Conductivity and Magnetism

Switchable Dielectric Materials Based on a Diprotonated Organic Cation Containing Two Different Anions: (C 5 H 16 N 2 )BF 4 X (X = Cl, Br, NO 3 )

Near-room-temperature dielectric switch and thermal expansion anomaly in a new hybrid crystal: 5]

Dibenzylammonium Trichloroacetate: an Above-Room-temperature Order–disorder Switchable Dielectric Material

Integrated Multi‐Channel Responsive Switches in a Room‐Temperature Crystal Actuator

Reversible Phase Transition and Second-Harmonic Response Based on a Zero-Dimensional Organic–Inorganic Hybrid Compound