Sulfuric Acid Leaching of Residue from Copper Anode Slime Pretreated by Alkaline Oxidative Pressure Leaching
LIU Weifeng,LIU Younian,YANG Tianzu,CHEN Lin,ZHANG Duchao,WANG An
2013-01-01
Abstract:The process of sulfuric acid leaching was adopted to treat the residue from copper anode slime pretreated by alkaline pressure oxidation leaching.The effects of many factors such as sulfuric acid concentration,temperature,time,liquid-solid ratio,stirring speed and oxidation type in sulfuric acid leaching on residue yield and leaching ratio were investigated.The results show that leaching ratios of copper,tellurium and silver increase with the increase of the concentration of sulfuric acid,especially for the leaching ratio of silver.The phase of undissolved copper in the leaching residue exists mainly in the elemental,and the leaching ratio of copper can be enhanced with air.The optimum conditions of sulfuric acid leaching are determined.Under the optimum conditions of the sulfuric acid concentration 2.7 mol/L,temperature 85 ℃,liquid-solid ratio 5:1,time 2 h,stirring speed 300 r/min and air pressure 0.1~0.2 MPa,the residue yield is 60%.The leaching rates of copper,tellurium,silver and nickel are 97.65%,77.53%,8.95% and 5.85%,respectively.