Abstract:The growing demand for nickel and cobalt increases the interest in extracting metals from secondary sources, such as flotation tailings. A preferential strategy for the processing of the complex and/or low-grade secondary sources may be material integration into existing primary processes. In this research, a robust sulfuric acid leaching treatment was studied for metal extraction from sulfidic flotation tailings (Ni 0.45 %, Co 0.80 %, Cu 0.20 %, Zn 0.58 %). The impact of leaching parameters on metals extraction was studied; oxygen gas (1–2 L/min), ferric ions (0.05–0.3 M), and hydrogen peroxide (0.5–0.8 M), temperature (30–90 °C), sulfuric acid concentration (0.2–2 M), and solid–liquid ratio (50–100 g/L). It was found that after 30-minutes 20.0 % of nickel, 5.6 % of cobalt, and 33.0 % of the main impurity iron were extracted using oxygen as oxidant. Increasing temperature and sulfuric acid concentration were shown to have a positive effect on extraction. Also, with the further addition of ferric ions, cobalt extraction could be slightly increased (from 6.2 % to 8.3 %) whereas both nickel and cobalt could be increased with hydrogen peroxide (nickel 22.9 %, cobalt 14.2 %). However, the use of H 2 O 2 can be challenging due to its high environmental footprint as well as partial decomposition by ferric ions, increasing H 2 O 2 consumption further. The results suggest that the mineralogy of the investigated tailings limited feasible metals extraction using atmospheric conditions up to ≈ 20 % for nickel and ≈ 10 % for cobalt, with nickel distributing stronger into non-refractory minerals while cobalt reported more to pyrite. For other base metals, zinc extraction from sphalerite was shown to be efficient (up to ≈ 90 %) whereas copper extraction was limited (up to ≈ 30 %). In future, such atmospheric sulfuric acid leaching may provide a robust recovery route for non-refractory minerals present in the tailings, while full valorization of sulfide tailings matrix will require higher intensity processing with technologies such as pressure oxidation (POX), concentrated chloride leaching, bioleaching, roasting-leaching or very fine milling of the raw material prior to atmospheric leaching.

Efficient recovery of iron from anaerobic roasted cyanide tailings using advanced oxidation technology

Cyanide detoxification and iron mineral recycle of cyanide tailings by the sustainable utilization technology of oxidation-reduction roasting: Process optimization and mechanism study

Treatment of actual cyanide gold extraction wastewater by persulfate oxidation and its reaction mechanism

Oxidation of Gold-Bearing Pyrite by Ammonium Persulfate

Recovering precious metals from spent catalysts by peroxydisulfate-based advanced oxidation process

Optimizing iron separation and recycling from iron tailings: A synergistic approach combining reduction roasting and alkaline leaching

Oxidative degradation of Orange G by persulfate activated with iron-immobilized resin chars

Sustainable processing of gold cyanide tailings: Reduction roasting, mechanical activation, non-cyanide leaching, and magnetic separation

The potential of a natural iron ore residue application in the efficient removal of tetracycline hydrochloride from an aqueous solution: insight into the degradation mechanism

Pyrite-mediated advanced oxidation processes: Applications, mechanisms, and enhancing strategies

Recovering palladium and gold by peroxydisulfate-based advanced oxidation process

In-depth analysis of the roles and mechanisms of sulfate radical and hydroxyl radical in the degradation of metal-cyanide complexes

Transforming Mining Waste to Wealth: A Novel Process for the Sustainable Recovery and Utilization of Iron Tailings through HCl Leaching and MOFs Absorption

Efficient Degradation of Acid Orange 7 in Aqueous Solution by Iron Ore Tailing Fenton-like Process.

Efficient roxarsone degradation by low-dose peroxymonosulfate with the activation of recycling iron-base composite material: Critical role of electron transfer

Atmospheric leaching of Ni, Co, Cu, and Zn from sulfide tailings using various oxidants

Research on the Comprehensive Utilization of Cyanidation Slags of a Gold Smelter

Reviving Riches: Unleashing Critical Minerals from Copper Smelter Slag Through Hybrid Bioleaching Approach

Mechanochemically assisted persulfate activation for the facile recovery of metals from spent lithium ion batteries

A Critical Review of Environmental Remediation Via Iron-Mediated Sulfite Advanced Oxidation Processes

Electrospun membranes of iron tailings toward peroxymonosulfate activation for efficient photocatalytic degradation of organic pollutants