Abstract:The gas-solid vertical single helical ribbon agitated reactor is widely used in the polypropylene industry. The gas flow and mass transfer determine the heat transfer capacity and product quality. In this work, the pressure drop was measured below and above minimum fluidization velocity (umf). Then, the axial and radial dispersion coefficients (DL and DR) were estimated below umf by measuring the step residence time distribution and the stationary radial tracer profiles, respectively. Pressure analysis show the agitation significantly reduces the bed pressure drop, changing the fixed bed below umf and bubbling bed above umf to an agitated bed with a periodic voidage. The DL was proportional to the gas velocity, with little influences of the stirring speed. The radial tracer profiles show the bed is divided by the inner diameter of the helical ribbon into the peripheral ascending region and the central descending region, without gas exchange between them. Furthermore. the tracer profiles in the descending region are classified into two types. For type I, the DR, calculated by the plug flow model with radial dispersion, is proportional to the gas velocity, with little effects of stirring speed. Type II shows uniform profiles due to the deflection of the gas flow toward the low pressure area at the inner diameter of helical ribbon. The causes of the two types are explained by the relative size of particle circulation and gas flux. These two flow regimes are quantitatively clarified with an empirical correlation of Re and Fr as flow regime transition boundary, namely dispersed plug flow and perfect mixing flow. With lower Re and higher Fr, it changes from dispersed plug flow to perfect mixing flow.

Multiscale Modeling of Mixing Behavior in A 3d Atom Transfer Radical Copolymerization Stirred-Tank Reactor

CFD Modeling of Styrene Polymerization in a CSTR

Integration of CFD and Polymerization for an Industrial Scale Cis-Polybutadiene Reactor

Numerical Analysis of Industrial Styrene Polymerization in Nonideal Tower Reactors

Modeling for the Diffusion Limitation of Free Radical Polymerization

Modeling of Molecular Weight and Copolymer Composition Distributions for Ethylene‐propylene Solution Copolymerization

Modeling and Experimentation of RAFT Solution Copolymerization of Styrene and Butyl Acrylate, Effect of Chain Transfer Reactions on Polymer Molecular Weight Distribution

Progress on agitated apparatus for polymer devolatilization and its CFD simulation

Effects of Periodic and Non‐periodic Chaotic Mixing on Morphology Development of Immiscible Polymer Blends

A Multiscale CFD-PBM Coupled Model for the Kinetics and Liquid–liquid Dispersion Behavior in a Suspension Polymerization Stirred Tank

Computational Fluid Dynamics Simulation of Multiscale Mixing in Anionic Polymerization Tubular Reactors

Multiscale Computational Fluid Dynamics–Population Balance Model Coupled System of Atom Transfer Radical Suspension Polymerization in Stirred Tank Reactors

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

Design and Control of Copolymer Composition Distribution in Living Radical Polymerization Using Semi‐Batch Feeding Policies: A Model Simulation

Methodology for designing solution polymerization reactors based on multiscale model construction and simulation

Modeling of the Methyl Methacrylate Atom Transfer Radical Suspension Polymerization Process: Polymerization and Particle Kinetics

Kinetic modeling of atom transfer radical copolymerization of methyl methacrylate and 2‐(trimethylsilyl) ethyl methacrylate in a train of continuous stirred‐tank reactors

Kinetic Modeling of Surface-Initiated Atom Transfer Radical Polymerization

Modeling of the Atom Transfer Radical Copolymerization Processes of Methyl Methacrylate and 2-(Trimethylsilyl) Ethyl Methacrylate under Batch, Semibatch, and Continuous Feeding: A Chemical Reactor Engineering Viewpoint

Dynamic Optimization of Batch Free Radical Polymerization with Conditional Modeling Formulation Through the Adaptive Smoothing Strategy