Abstract:The X-ray satellite "Einstein Probe" of the Chinese Academy of Sciences (CAS) was successfully launched on 9 January 2024 at 15:03 Beijing Time from the Xichang Satellite Launch Center in China with a "Long March-2C" rocket. The Einstein Probe is equipped with two scientific X-ray telescopes. One is the Wide-field X-ray Telescope (WXT), which uses lobster-eye optics. The other is the Follow-up X-ray Telescope (FXT), a Wolter-I type telescope. These telescopes are designed to study the universe for high-energy X-rays associated with transient high-energy phenomena. The FXT consists of two modules based on 54 thin X-ray Wolter-I grazing incidence Ni-replicated mirrors produced by the Italian Media Lario company, as contributions from the European Space Agency and the Max Planck Institute for Extraterrestrial Physics (MPE), which also provided the focal-plane detectors. Meanwhile, the Institute of High Energy Physics (IHEP), together with the Harbin Institute of Technology and Xi'an Institute of Optics and Precision Mechanics, has also completed the development and production of the structural and thermal model (STM), qualification model (QM) and flight model (FM) of FXT mirrors for the Einstein Probe (EP) satellites for demonstration purposes. This paper introduces the precision manufacturing adopted in China of Wolter-I X-ray mirror mandrels similar to those used for the EP-FXT payload. Moreover, the adopted electroformed nickel replication process, based on a chemical nickel–phosphorus alloy, is reported. The final results show that the surface of the produced mandrels after demolding and the internal surface of the mirrors have been super polished to the roughness level better than 0.3 nm RMS and the surface accuracy is better than 0.2 μm, and the mirror angular resolution for single mirror shells may be as good as 17.3 arcsec HPD (Half Power Diameter), 198 arcsec W90 (90% Energy Width) @1.49 keV (Al-K line). These results demonstrate the reliability and advancement of the process. As the first efficient X-ray-focusing optics manufacturing chain established in China, we successfully developed the first focusing mirror prototype that could be used for future X-ray satellite payloads.

Development of Manufacture of Mirror Glass Substrate for X-Ray Timing and Polarization Observatory

Development and testing of glass substrate Wolter-1 X-ray focusing mirror

Optical Design and Fabrication of the off Axis Paraboloid and Ellipsoidal Mirrors of Beam Line for Synchrotron Radiation Biological Spectroscopic Experiments

A Time-Resolved Three-Channel Soft X-ray Spectrometer

Ultraprecision Fabrication of Large Stamping Die of Wolter Mirror for an X-Ray Telescope by ELID Grinding

Study on the Fabrication Process of X-ray Focusing Mirrors

Manufacturing and Testing of X-ray Imaging Components with High Precision

Precision Manufacturing in China of Replication Mandrels for Ni-Based Monolithic Wolter-I X-ray Mirror Mandrels

Study of the relationship between metrological characterization and angular resolution in grazing-incidence X-ray optics

Development of mirrors made of chemically tempered glass foils for future X-ray telescopes

Thermal shaping of thin glass panels for hard X-ray telescope optics

Full Aperture Super-Smooth Polishing and Surface Topology Evolution of the Mandrels for X-ray Optics Used in Extp Mission

A Transmissive X-Ray Polarimeter Design for Hard X-Ray Focusing Telescopes

A thermo-optical test device utilizing the 100-m x-ray test facility

Thermal stress cleaving of glass-based X-ray telescope lenses by heated wire to eliminate microdefects

Ultra-Precision Single-Point Diamond Turning and Measuring of Molding Dies for Fabricating Next-Generation Hard X-ray Telescopes

Precision Polishing of the Mandrel for X-Ray Grazing Incidence Mirrors in the Einstein Probe

A simulation result of X-ray focusing mirror under actual surface state used in FXT on board EP satellite

Simulation and Experimental Study of Replication of X-Ray Focusing Mirrors

Initial Development of High Accuracy Carbon Fiber Reinforced Plastics (CFRP) Reflector Segment for the 60-Meters Submillimeter Telescope

Development Of X-Ray Focusing Telescope For Hubs