A CFD Study of Wave Influence on Film Steam Condensation in the Presence of Non-Condensable Gas

Xianmao Wang,Huajian Chang,Michael Corradini
DOI: https://doi.org/10.1016/j.nucengdes.2016.06.003
IF: 1.7
2016-01-01
Nuclear Engineering and Design
Abstract:Steam condensation plays an important role in removing heat from the containment of a nuclear plant during postulated accidents. However, due to the presence of non-condensable gases such as air and hydrogen in the containment, the condensation rate can decrease dramatically. Under certain conditions, the condensate film on the cold containment walls can affect the overall heat transfer rate. The wavy interface of the condensate film is a factor and is usually believed to enhance the condensation rate, since the waves can both increase the interfacial area and disturb the non-condensable gas boundary layer. However, it is not clear how to properly account for this factor and what is its quantitative influence in experiments. In this work, a CFD approach is applied to study the wave effects on film condensation in the presence of non-condensable gas. Wavy surfaces with and without moving velocities are used to replace the wavy interface of the falling film. A condensation model is incorporated in the ANSYS FLUENT simulation and a realizable k-epsilon turbulence model is applied. Various wavy surfaces with different wave heights and wavelengths are selected to conduct numerical experiments with a wide range of gas velocities. The results show that the wave structure can enhance condensation rate up to ten percent mainly due to the alteration of local flow structures in the gas phase. The increments of the condensation rate due to the wavy interface can vary with different gas velocities. The investigation shows that a multiplication factor accounts for the wave effects on film condensation should be added in the containment heat transfer analysis where the film Reynolds number is large. (C) 2016 Elsevier B.V. All rights reserved.
What problem does this paper attempt to address?