Abstract:High-performance engineering thermoplastics offer lightweight and excellent mechanical performance in a wide temperature range. Their composites with carbon nanotubes are expected to enhance mechanical performance, while providing thermal and electrical conductivity. These are interesting attributes that may endow additional functionalities to the nanocomposites. The present work investigates the optimal conditions to prepare polyether ether ketone (PEEK)/multi-walled carbon nanotube (MWCNT) nanocomposites, minimizing the MWCNT agglomerate size while maximizing the nanocomposite electrical conductivity. The aim is to achieve PEEK/MWCNT nanocomposites that are suitable for melt-spinning of electrically conductive multifilament's. Nanocomposites were prepared with compositions ranging from 0.5 to 7 wt.% MWCNT, showing an electrical percolation threshold between 1 and 2 wt.% MWCNT (107–102 S/cm) and a rheological percolation in the same range (1 to 2 wt.% MWCNT), confirming the formation of an MWCNT network in the nanocomposite. Considering the large drop in electrical conductivity typically observed during melt-spinning and the drawing of filaments, the composition PEEK/5 wt.% MWCNT was selected for further investigation. The effect of the melt extrusion parameters, namely screw speed, temperature, and throughput, was studied by evaluating the morphology of MWCNT agglomerates, the nanocomposite rheology, and electrical properties. It was observed that the combination of the higher values of screw speed and temperature profile leads to the smaller number of MWCNT agglomerates with smaller size, albeit at a slightly lower electrical conductivity. Generally, all processing conditions tested yielded nanocomposites with electrical conductivity in the range of 0.50–0.85 S/cm. The nanocomposite processed at higher temperature and screw speed presented the lowest value of elastic modulus, perhaps owing to higher matrix degradation and lower connectivity between the agglomerates. From all the process parameters studied, the screw speed was identified to have the higher impact on nanocomposite properties.

Preparation of Poly(Ether Ether Ketone)-Based Composite with High Electrical Conductivity, Good Mechanical Properties and Thermal Stability

Synergistically Improving the Thermal Conductivity and Mechanical Strength of PEEK/MWCNT Nanocomposites by Functionalizing the Matrix with Fluorene Groups

Multi-walled Carbon Nanotube Induced Co-Continuity of Poly(ether Ether Ketone)/polyimide Blends for High Performance Conductive Materials

A chemically modified MWCNT/PEEK multiscale thermoplastic composites: Forming, mechanical performance, and application

Material With High Dielectric Constant, Low Dielectric Loss, And Good Mechanical And Thermal Properties Produced Using Multi-Wall Carbon Nanotubes Wrapped With Poly(Ether Sulphone) In A Poly(Ether Ether Ketone) Matrix

Preparation of PEEK/MWCNTs Composites with Excellent Mechanical and Tribological Properties

Improved Thermal and Electromagnetic Shielding of PEEK Composites by Hydroxylating PEK-C Grafted MWCNTs

Enhanced Interfacial and Mechanical Properties of Carbon Fiber/peek Composites by Hydroxylated PEEK and Carbon Nanotubes

Enhanced Electrical Properties by Tuning the Phasemorphology of Multiwalled Carbon Nanotube-Filled Poly(Ether Ether Ketone)/Polyimide Composites

Increasing the Toughness While Reducing the Viscosity of Carbon Nano-Tube/polyether Imide/polyether Ether Ketone Nanocomposites

High-Performance PEEK/MWCNT Nanocomposites: Combining Enhanced Electrical Conductivity and Nanotube Dispersion

Preparation of MWCNTs/CF/PEEK Multi-Scale Composites with Good Mechanical and Electrical Conductivity by a Two-Step Process of AFP and Out-of-autoclave Tempering

Effect of Annealing and Carbon Nanotube Infill on the Mechanical and Electrical Properties of Additively Manufactured Polyether-Ether-ketone Nanocomposites Via Fused Filament Fabrication

Interfacial and mechanical performance of chemically modified high content MWCNT/PEEK thermoplastic composites

Structure-function Integrated Poly (aryl Ether Ketone)-Grafted MWCNTs/poly (ether Ether Ketone) Composites with Low Percolation Threshold of Both Conductivity and Electromagnetic Shielding

Thermal conductive segregated multi-scale network constructed by ball-milling and in-situ polymerization in PEEK/MWCNT/graphite composite

Synthesis and Performance of PEEK/Nap-PAEK Modified WMCNTs Composites

The Performances of Modified Single-Walled Carbon Nanotubes/poly(ether Ether Ketone) Composites Prepared by Solution Blending and Melt Blending

Effect of Mwcnts Chemically Grafted with Pbpesk by Diazotization on the Mechanical Properties of Cf/Poly(Aryl Bis-Phthalazinone Ether Sulfone Ketone) Composites

Preparation and Electrical Properties of Multiwalled Carbon Nanotubes Filled High-density Polyethylene Composites

Engineering the Mechanical Properties of CNT/PEEK Nanocomposites