Abstract:To address the effect of parameter variation on the dead-beat predictive current control, this paper proposes a composite dead-beat predictive current control strategy. Firstly, the traditional dead-beat predictive current control and the traditional longberg observer are introduced. Subsequently, the effect of motor nominal value mismatch on the predictive current control and longberg observer gain is analyzed, the results show that the motor parameter error affects the current in the d-q axis, and the excessive flux linkage error causes large current fluctuations. To simplify the complexity of calculating the gain of the full-order longberg observer, the reduced-order longberg observer is designed, and the computation of the gain is largely simplified. Meanwhile, to eliminate the effect of flux linkage on the q-axis current, a reduced-order incremental longberg observer is designed, and the effect of the flux linkage variation on the q-axis current is effectively solved. To address the effect of the nominal value error, the parameter identification is introduced and the composite dead-beat predictive current control strategy is proposed. The nominal value of the motor is identified by the recursive least squares identification, then input into the controller to correct the parameters of the controller. Finally, the simulation validation in Matlab / Simulink is performed, and the results show that the composite dead-beat predictive current control has a faster current response speed and smaller current fluctuation, and the effect of flux linkage variation on the motor system is eliminated.

An Adaptive Dead-Time Compensation Method Based on Predictive Current Control

A Fast Response Robust Deadbeat Predictive Current Control for Permanent Magnet Synchronous Motor

A Modified Deadbeat Predictive Current Control with Improved Dynamic Performance under Insufficient Voltage Margin for IPMSM

A Modified Deadbeat Predictive Current Control for Improving Dynamic Performance of PMSM

A Deadbeat Predictive Current Harmonics Suppression Method for IPMSM Based on Quasi Proportional Resonant Control

Deadbeat Predictive Current Control for Current Source Inverter Fed High-Speed Permanent Magnet Synchronous Motor

Composite Dead-beat Predictive Current Control of PMSM

Predictive current control for Permanent Magnet Synchronous Motor based on deadbeat control

A new adaptive dead time compensation method for dual three-phase permanent magnet synchronous motor

A Robust Deadbeat Predictive Current Control Method for IPMSM

Current-Detection-Independent Dead-Time Compensation Method Based on Terminal Voltage A/D Conversion for PWM VSI

An Optimized Deadbeat Control Scheme Using Fuzzy Control in Three-Phase Voltage Source PWM Rectifier

Improved Deadbeat Predictive Current Control Strategy for Permanent Magnet Motor Drives

Adaptive Deadbeat Predictive Current Control for PMSM with Feed Forward Method.

Current Prediction Error Reduction Method of Predictive Current Control for Permanent Magnet Synchronous Motors.

Adaptive filter Application in Current Vector Dead Time Compensation

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

A New Inverter Compensation Strategy Based On Adjusting Dead-Time On-Line

Current Sensorless Deadbeat Predictive Control Method for Permanent Magnet Synchronous Motor

Model Predictive Current Control with Adaptive-Adjusting Timescales for PMSMs

Deadbeat Predictive Current Control for Non-Salient PMAC Machine Drives at Very Low Switching-to-fundamental Frequency Ratios