Abstract:To address the effect of parameter variation on the dead-beat predictive current control, this paper proposes a composite dead-beat predictive current control strategy. Firstly, the traditional dead-beat predictive current control and the traditional longberg observer are introduced. Subsequently, the effect of motor nominal value mismatch on the predictive current control and longberg observer gain is analyzed, the results show that the motor parameter error affects the current in the d-q axis, and the excessive flux linkage error causes large current fluctuations. To simplify the complexity of calculating the gain of the full-order longberg observer, the reduced-order longberg observer is designed, and the computation of the gain is largely simplified. Meanwhile, to eliminate the effect of flux linkage on the q-axis current, a reduced-order incremental longberg observer is designed, and the effect of the flux linkage variation on the q-axis current is effectively solved. To address the effect of the nominal value error, the parameter identification is introduced and the composite dead-beat predictive current control strategy is proposed. The nominal value of the motor is identified by the recursive least squares identification, then input into the controller to correct the parameters of the controller. Finally, the simulation validation in Matlab / Simulink is performed, and the results show that the composite dead-beat predictive current control has a faster current response speed and smaller current fluctuation, and the effect of flux linkage variation on the motor system is eliminated.

Deadbeat Predictive Current Control for Current Source Inverter Fed High-Speed Permanent Magnet Synchronous Motor

A Fast Response Robust Deadbeat Predictive Current Control for Permanent Magnet Synchronous Motor

A Modified Deadbeat Predictive Current Control for Improving Dynamic Performance of PMSM

A Modified Deadbeat Predictive Current Control with Improved Dynamic Performance under Insufficient Voltage Margin for IPMSM

An Improved Deadbeat Predictive Current Control Strategy for Interior Permanent Magnet Synchronous Motors

A Deadbeat Predictive Current Harmonics Suppression Method for IPMSM Based on Quasi Proportional Resonant Control

A Robust Deadbeat Predictive Current Control Method for IPMSM

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

An Incremental Deadbeat Predictive Current Control Method for PMSM with Low Sensitivity to Parameter Variation

Deadbeat Predictive Current Control Based on Accurate Discrete Luenberger Observer for PMSM under Low Frequency Ratio

Robust Deadbeat Predictive Current Sensorless Control for Permanent Magnet Synchronous Motor

A Combined Model Predictive Current Control for SPMSM Drive with Improved Robustness and Control Precision

Composite Dead-beat Predictive Current Control of PMSM

Current Prediction Error Reduction Method of Predictive Current Control for Permanent Magnet Synchronous Motors.

Novel Deadbeat Predictive Current Control for PMSM With Parameter Updating Scheme

Deadbeat Predictive Current Control for Non-Salient PMAC Machine Drives at Very Low Switching-to-fundamental Frequency Ratios

An I/f Control Method With Closed-loop Regulation of Current Vector for Surface Permanent Magnet Synchronous Motor Drives

Model Predictive Current Control with Adaptive-Adjusting Timescales for PMSMs

An Error Tracking Dead-beat Model Predictive Torque Control for Open-Winding Permanent Magnet Synchronous Motor with Common DC Bus

Deadbeat Model Predictive Current Control with Voltage Limits for Five-Phase SPMSMs

Robust model predictive current control without dead‐zone compensation