Abstract:A new model characterizing the IR drop in an active-matrix organic light-emitting diode (AMOLED) display is built successfully by this study, which can be used to effectively improve brightness uniformity by adjusting gray levels addressed accordingly to pixels in the panel. The IR-drop refers to the voltage drops along the thin power lines from the external driver at panel edge to internal pixels. The built IR-drop model is in a form of vector and matrix with parameters and variables such as equivalent resistances of horizontal/vertical power lines and the current through the drive thin film transistors (TFTs) and OLEDs in pixels. With precisely calibrated parameters, the model can be solved for the voltage drops at given sub-pixels in the AMOLED panel. Based on the solved dropped voltages at each pixel, the gray level assigned to the pixel can be adjusted accordingly to restore the desired pixel luminance. The proposed compensation was implemented in a 14-inch AMOLED panel with FHD resolution for performance validation. The experimental results show less than 2.5% of prediction error on voltage drops, leading to effective compensations that improves the measured pixel currents from 66.1% to 89.7%, 70.3% to 92.9%, and 48.8% to 85.1% of the desired, non-dropped currents, respectively, for red, green, and blue illuminance at the L255 gray level. Also from experiments are substantial improvements of 21.7%, 21.5%, and 35.3% on the brightness uniformity of the panel displayed for red-, green-, blue-images at L255 gray, respectively.

Power Consumption Model for AMOLED Display Panel Based on 2T-1C Pixel Circuit

37‐3: Power Consumption of OLED and Μled Displays

How is Energy Consumed in Smartphone Display Applications?

Design of Passive Matrix Organic Light-Emitting Diodes

37-3 / E.-L. Hsiang

Research Progress of Active Matrix Organic Light Emitting Diode (AMOLED) Displays Driven by Metal Oxide Thin Film Transistors (TFT)

New Low-Voltage Driving Compensating Pixel Circuit Based on High-Mobility Amorphous Indium-Zinc-Tin-Oxide Thin-Film Transistors for High-Resolution Portable Active-Matrix OLED Displays

P‐13.11: Highly Efficient Electric‐Thermal Simulation for AMOLED Design

Low Power Consumption Design for LCD Panel

A New IR-Drop Model That Improves Effectively the Brightness Uniformity of an AMOLED Panel

Improving the Power Efficiency of Micro-LED Displays with Optimized LED Chip Sizes

Transistor Technologies and Pixel Circuit Design for Efficient Active-Matrix Organic Light-Emitting Diode Displays

A Low Power and IR Drop Compensable AMOLED Pixel Circuit Based on Low-Temperature Poly-Si and Oxide (LTPO) TFTs Hybrid Technology

P.16: Dynamic Supply Voltage Scaling of Pixel Circuits for Static Power Reduction in AMOLEDs

IR-Drop-Based Temperature Distribution in Large-Size AMOLED Panel

Reducing Power Consumption of Active-Matrix Mini-LED Backlit LCDs by Driving Circuit

Source-Gated Transistors for Power- and Area-Efficient AMOLED Pixel Circuits

A Method to Improve IR Drop Issue of Large-Size Top-Emission AMOLED

Optimal Chip Size for Reducing the Power Consumption of Micro-Led Displays

Interaction-based Low Power Service for Mobile OLED Displays.

The IR Drop Effect of 2T1C and 3T1C Driving Modes in Top Emission AMOLED