Abstract:In this work, the as-cast directionally solidified (DS) Fe–B alloys with various Si contents and different boride orientation were designed and fabricated, and the as-cast microstructures and static oxidation behaviors of the DS Fe–B alloys were investigated extensively. The as-cast microstructure of the DS Fe–B alloys consists of the well-oriented Fe2B columnar grains and α-Fe, which are strongly refined by Si addition. The oxidation interface of the scales in the DS Fe–B alloy with 3.50 wt.% Si demonstrates an obvious saw-tooth shaped structure and is embedded into the alternating distributed columnar layer structures of the DS Fe–B alloy with oriented Fe2B and α-Fe matrix, which is beneficial to improve the anti-peeling performance of the oxide film compared with lower amounts of Si addition in DS Fe–B alloys with oriented Fe2B [002] orientation parallel to the oxidation direction (i.e., oxidation diffusion direction, labeled as Fe2B// sample). In the DS Fe–B alloys with oriented Fe2B [002] orientation vertical to the oxidation direction (i.e., labeled as Fe2B⊥ sample), due to the blocking and barrier effect of laminated-structure boride, Si is mainly enriched in the lower part of the oxide film to form a dense SiO2 thin layer adhered to layered boride. As a result, the internal SiO2 thin layer plays an obstructed and shielded role in oxidation of the substrate, which hinders the further internal diffusion of oxygen ions and improves the anti-oxidation performance of the Fe2B⊥ sample, making the average anti-oxidation performance better than that of the Fe2B// sample.

Effect of Orientation and Lamellar Spacing of Fe2B on Interfaces and Corrosion Behavior of Fe-B Alloy in Hot-Dip Galvanization

Interface Characteristics and Corrosion Behaviour of Oriented Bulk Fe2B Alloy in Liquid Zinc

Effect of Crystal Orientation on Microstructure and Properties of Bulk Fe2b Intermetallic

Effect of Fe2B Orientation on Erosion–corrosion Behavior of Fe–3.5 Wt.% B Steel in Flowing Zinc

Microstructure and Corrosion Behavior of Cast Fe–B Alloys Dipped into Liquid Zinc Bath

Effect of Erosion Angle and Fe2B Orientation on Cavitation Erosion and Interfaces of Fe-B Alloy in High-Velocity Flowing Zinc

Interfacial Morphologies and Erosion–corrosion Behavior of Directional Fe-3.5 Wt.% B Steel in Flowing Liquid Zn Containing 0.30 Wt.% Al

Interface Morphology and Corrosion Behavior of Bulk Fe2B in Liquid Al

Effect of grain size and crystal orientation on the corrosion behavior of as-extruded Mg-6Gd-2Y-0.2Zr alloy

Interface Characterization and Erosion–corrosion Behavior of Directional Fe-3.5 Wt.% B Steel in Flowing Liquid Zinc at Various Temperatures

Erosion-Corrosion Resistant Property of Directionally Solidified Fe-3.5b Alloy in Flowing Liquid Zinc

Microstructure and interface characteristics of Fe-B alloy in liquid 0.25 wt.% Al-Zn at various bath temperatures

Effects of Boron Concentration on the Corrosion Resistance of Fe–B Alloys Immersed in 460°C Molten Zinc Bath

The Microstructure and Corrosion Resistance of Fe-B-W-Mn-Al Alloy in Liquid Zinc

Interfacial Morphology and Corrosion Resistance of Fe–B Cast Steel Containing Chromium and Nickel in Liquid Zinc

Effects of Boride Orientation and Si Content on High-Temperature Oxidation Resistance of Directionally Solidified Fe–B Alloys

Investigation of Erosion Properties of Directionally Solidified Fe–B Alloy in Various Velocities Liquid Zinc

Investigation of flowing liquid zinc erosion and corrosion properties of the Fe–B alloy at various times

Corrosion Behaviors of ODS-FeCrAl in Oxygen-Saturated Lead-Bismuth Eutectic at 550°C: Effects of Grain Boundaries and Minor Elements

Effects of Liquid Zinc Velocity on Erosion-Corrosion Performance of Fe-B Alloy in Flowing Liquid Zinc Bath

Effect of grain size uniformity and crystallographic orientation on the corrosion behavior of Mg-2Zn-1Al bar