Abstract:One of the advantages of perovskite solar cells is able to be compatible with low-cost large-scale solution process via roll-to-roll technique. Green solvent engineering plays an important role in large-scale manufacture. N-methyl pyrrolidone (NMP) is considered to be low toxicity and biodegradable, which is less harmful to the human body and the environment. However, it is difficult to achieve high film quality for NMP-processed perovskite film in a short time. In this communication, we develop a two-step green anti-solvent engineering to fast tune the morphology of the NMP-processed perovskite film. The first step is to deposit ethyl acetate (EA) on top of the precursor film to induce fast nucleation. Secondly, methylammonium chloride (MACl) solution dissolved in isopropanol (IPA) is added to affect the crystal growth process and subsequently form a two-layer structured perovskite film including MAPbI3 as a bottom layer and mixed MAPbI3/MAPbIxCl1-x as an upper layer, respectively. The upper layer shows significantly enhanced degree of crystallinity and reduced trap states. It has been recognized that MAPbIxCl1-x has a wide bandgap with a higher LUMO level and a lower HOMO level than that of MAPbI3. Thus, the enrichment of Cl based perovskite near/at the surface can not only promote the efficient charge transfer, but also improve the VOC of PSCs. Furthermore, the limited content of MAPbIxCl1-x in MAPbI3 barely affects the whole absorption of the perovskite and thus JSC of the device. Thus, the as-prepared inverted PSC yields a high PCE of 16%, mainly attributing to obviously improved VOC and JSC, while the reference device containing the perovskite layer only treated by EA shows a PCE of 14.36%. Notably, NMP-processed perovskite film exhibits high transmittance of 22% in the 380−780 nm wavelength range, offering great potential in semi-transparent PSCs.

Pure- or Mixed-Solvent Assisted Treatment for Crystallization Dynamics of Planar Lead Halide Perovskite Solar Cells

Phase Engineering of Perovskite Materials for High-Efficiency Solar Cells: Rapid Conversion of CH3NH3PbI3 to Phase-Pure CH3NH3PbCl3 Via Hydrochloric Acid Vapor Annealing Post-Treatment

Pseudohalide-Induced Recrystallization Engineering for CH3NH3PbI3 Film and Its Application in Highly Efficient Inverted Planar Heterojunction Perovskite Solar Cells

Improving the photovoltaic performance of planar heterojunction perovskite solar cells by mixed solvent vapor treatment

Iodine and Chlorine Element Evolution in CH3NH3PbI3–xClx Thin Films for Highly Efficient Planar Heterojunction Perovskite Solar Cells

Uniform CH3NH3PbI3-xBrx Film for Efficient Planar Perovskite Solar Cells Via Facile PbBr2 Pre-Coating Layer Treatment

Vacuum-Assisted Thermal Annealing of CH3NH3PbI3 for Highly Stable and Efficient Perovskite Solar Cells

Crystallization Dynamic Control of Perovskite Films with Suppressed Phase Transition and Reduced Defects for Highly Efficient and Stable All-Inorganic Perovskite Solar Cells

Mixed antisolvents assisted treatment of perovskite for photovoltaic device efficiency enhancement

Morphology Control Towards a Greener, Non-Halogenated Solvent System Processed CH3NH3PbI3 Film for High Performance Perovskite Solar Cells

Accelerated formation and improved performance of CH3NH3PbI3-based perovskite solar cells via solvent coordination and anti-solvent extraction

High Efficient Planar-Heterojunction Solar Cells Achieved by Using A Smooth Ch3nh3pbi3 Film Via A New Approach of Forming the Pbi2 Nanostructure Together with Strategically High Ch3nh3i Concentration

Tunable Crystallization and Nucleation of Planar CH3NH3PbI3 Through Solvent-Modified Interdiffusion

Controlled Crystallization of CH3NH3PbI3 Films for Perovskite Solar Cells by Various PbI2(X) Complexes

Growth and Evolution of Solution-Processed CH3NH3PbI3-xClx Layer for Highly Efficient Planar-Heterojunction Perovskite Solar Cells

Growth of Compact CH3NH3PbI3 Thin Films Governed by the Crystallization in PbI2 Matrix for Efficient Planar Perovskite Solar Cells.

Morphology Control towards Green Solvent System Processed High Performance Semitransparent CH3NH3PbI3 Film for Perovskite Solar Cell

Improvement in the Performance of Inverted Planar Perovskite Solar Cells Via the CH3NH3PbI3-xClx:ZnO Bulk Heterojunction

High-performance Planar Heterojunction Perovskite Solar Cells: Preserving Long Charge Carrier Diffusion Lengths and Interfacial Engineering

A Facile Solvent Strategy Enables Morphology Controllable Perovskite Films for CsPbBr3 Perovskite Solar Cells

Solvent Engineering Approach Toward Optimized Phase and Morphology of CsPbBr3 Films for Efficient and Stable Planar Perovskite Solar Cells and Photodetectors