Abstract:Catalytic upgrading of volatiles is an essential technology to improve the product distribution of pyrolysis for the clean and efficient utilization of low-rank coals. In this work, novel acid-base bifunctional catalysts composed of Ni/Li/Al oxides were designed and prepared using LDH precursors with tunable chemical composition and structural properties. The catalysts were systematically characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), physisorption, NH 3 -temperature programmed desorption (NH 3 -TPD), CO 2 -temperature programmed desorption (CO 2 -TPD), H 2 -temperature programmed reduction (H 2 -TPR), and scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS). A two-stage fixed bed reactor was employed to evaluate the performance of the catalysts. Characterization results suggest that the crystal size of NiO and the surface area of the catalyst decreased with increasing Li content and decreasing Ni content in the catalyst, while the pore volume and pore diameter were positively correlated with Li content. Moreover, the addition of Li reduced the amount of weak acid sites and raised the amount of total basic sites. Consequently, the bifunctional catalysts boosted the yield of light tar and the contents of aromatics and phenols in tar. Specifically, with the highest total acid sites (569 μmol/g) promoting the cracking of heavy pitch components, Ni 2.5 Li 0.5 Al 1 decreased the content of pitch in tar to 23.8 wt%, representing a 42.7 % drop from the corresponding non-catalytic pyrolysis. Accordingly, it improved the light tar yield to 7.2 wt%, which was 18 % higher than non-catalytic pyrolysis. 450 °C is identified as a suitable temperature for the catalytic upgrading of volatiles from Naomaohu coal; higher catalysis temperatures at 500 °C and 550 °C led to lower tar yield and lower phenols content, along with higher gas yield and more carbon deposition.

Pilot-plant Study of Upgrading of Medium and Low-Temperature Coal Tar to Clean Liquid Fuels

Study on the Preparation of Clean Liquid Fuel by Wide Fraction High-Temperature Coal Tar Deep Hydro-Upgrading on a Pilot Plant Trickle Bed Reactor

Co-hydrotreating of Algae and Used Engine Oil for the Direct Production of Gasoline and Diesel Fuels or Blending Components

Hydrocracking of Bio-Alkanes over Pt/Al-MCM-41 Mesoporous Molecular Sieves for Bio-Jet Fuel Production

Mild Hydrotreatment of Low Temperature Coal Tar Distillate: Product Composition

Combined Process of Hydrocracking and Hydrofining of Coal Tar

Impact of Pt/Al-MCM-41 Catalyst Metal/Acid Ratio in Hydrocracking of Bio-Alkanes for Bio-Jet Fuel Production

Hydro-upgrading of algal bio-oil in tetralin for the production of high-quality liquid fuel: Process intensification

Catalytic upgrading of Naomaohu coal pyrolysis volatiles over NiAl and NiLiAl oxides

Conversion of low temperature coal tar into high value-added chemicals based on the coupling process of fast pyrolysis and catalytic cracking

A tandem pyrolysis-upgrading strategy in an integrated reactor to improve the quality of coal tar

Gentle hydrotreatment of shale oil in fixed bed over Ni-Mo/Al2O3 for upgrading

Molecular composition of low temperature coal tar and its transformation in the hydrogenation-refining process

Base-acid tandem catalytic upgrading of coal pyrolysis volatiles: the effects of alkaline earth oxides and modified HZSM-5 zeolites

Hydrocarbon Fuels from Sequential Hydrothermal Liquefaction (HTL) of Lignite and Catalytic Upgrading of Crude Oil

Hydrogen production from catalytic steam reforming of toluene over trace of Fe and Mn doping Ni/Attapulgite

Application of Coal Tar Products and Evaluation of the Stability of Residual Marine Fuels

Hydrotreatment of model compounds with catalysts of NiW/Al2O3 and NiWP/Al2O3 to simulate low temperature coal tar oil

Catalytic upgrading of coal volatiles with Fe2O3 and hematite by TG-FTIR and Py-GC/MS

Catalytic Upgrading of Coal Pyrolysis Volatiles by Porous Carbon Materials Derived from the Blend of Biochar and Coal

Highly Efficient Transformation of Tar Model Compounds into Hydrogen by a Ni-Co Alloy Nanocatalyst During Tar Steam Reforming