Abstract:Thermal management of high power electronic systems such as advanced lasers, light emitting diodes, radars, microprocessors, electrical machines, and power inverters, is becoming critical in defense, space, and commercial applications. As a liquid-vapor phase-change process, capillary evaporation on wicking structures has received increased interest owing to its capability dissipating high heat flux by increasing the effective evaporation area and sustaining the liquid supply. However, the approaches based on capillary evaporation suffer from intrinsic tradeoffs between the low thermal resistance for heat flow and the high wicking flow rate for liquid supply, which make it challenging to optimize both heat transfer coefficient (HTC) and critical heat flux (CHF) on the same wicking structure. Here, we present a cost-effective hybrid wicking structure, that can be scalably manufactured using commercial copper micromeshes along with simple etching processes, to enable a novel capillary-driven liquid film boiling heat transfer by simultaneously improving liquid supply and increasing nucleation sites. The interconnected microchannels between woven mesh layers and the substrate serve as low flow resistance passages for high volumetric flow rate of the liquid. Through creating nanograsses and microcavities on the multilayer micromeshes, the liquid flow is enhanced for higher CHF due to the increased surface wettability. Moreover, a plural of microcavities on the mesh surface decrease the superheat for early onset of nucleate boiling (ONB), resulting in higher HTC. Enhanced CHF (198.6 W/cm2) and HTC (138.7 kW/m2 K) are observed on the hybrid mesh wicking structure with a 10 mm × 10 mm heated area due to more than twice the flow rate for liquid supply and more than one third reduced superheat at the ONB, compared to that on the plain mesh wicking structure. The insights gained from this study can be used to guide the design and manufacturing of highly efficient wicking structures in heat pipes, vapor chambers, and other high flux thermal systems.

Effect of Powder Size on Capillary and Two-Phase Heat Transfer Performance for Porous Interconnected Microchannel Nets As Enhanced Wick for Two-Phase Heat Transfer Devices

Characterization of capillary performance of composite wicks for two-phase heat transfer devices

Effect of Operational Parameters on Flow Boiling Heat Transfer Performance for Porous Interconnected Microchannel Nets

Effects of Heat Flux, Mass Flux and Channel Width on Flow Boiling Performance of Porous Interconnected Microchannel Nets

Effect of Fabrication Parameters on Capillary Performance of Composite Wicks for Two-Phase Heat Transfer Devices

Fabrication and capillary characterization of multi-scale micro-grooved wicks with sintered copper powder

Three-dimensional Pore-Scale Simulations of Dynamic Wicking Processes on Micro-Structured Wicks

Experimental and Theoretical Study on Performance of Bi-Porous Wick for Passive Phase-Change Devices

Achieving robust and enhanced pool boiling heat transfer using micro–nano multiscale structures

Wicking capability evaluation of multilayer composite micromesh wicks for ultrathin two-phase heat transfer devices

Experimental Study on the Capillary Performance of Aluminum Micro-Grooved Wicks with Reentrant Cavity Array

Effect of fabrication parameters on capillary pumping performance of multi-scale composite porous wicks for loop heat pipe

Effect of Structural Parameters on Pool Boiling Heat Transfer for Porous Interconnected Microchannel Nets

Pool Boiling Heat Transfer Enhancement on the Hybrid Surfaces Coupling Capillary Wick and Minichannels

Experimental Study on Hydraulic and Thermal Characteristics of Composite Porous Wick with Spherical–dendritic Powders

Experimental Investigation of Capillary Force in a Novel Sintered Copper Mesh Wick for Ultra-Thin Heat Pipes

Capillary-driven liquid film boiling heat transfer on hybrid mesh wicking structures

Experimental Study on Pore Structure and Performance of Sintered Porous Wick

Prediction of Effective Thermal Conductivity of a Porous Capillary Wick in a Vapor Chamber

Pore size optimization and fluid channel analysis of composite wick and anti-gravity study

Vapor chamber with two-layer liquid supply evaporator wick for high-heat-flux devices