Abstract:This paper proposes a furthering approach for extracting the first several flexural and torsional–flexural frequencies of thin-walled box girders from the residual contact response of a two-wheel test vehicle passing the bridge. Unlike most previous studies, the single-axle test vehicle is modeled as a two degree-of-freedom (DOF) system to account for the two wheels' rocking motion, which relates to torsional–flexural motion of the beam. To start, a new theory for the mono-symmetric thin-walled beam subjected to a two-wheel moving vehicle is presented. The wheel contact response derived herein (which is free of vehicle frequencies) enables us in the first stance to remove the overshadowing effect on bridge frequencies brought by outstanding vehicle frequencies. The other concern in extracting the bridge frequencies is the noises posed by random pavement roughness, which is overcome through the use of the residual contact response generated by two identical connected vehicles. This paper furthers the existing ones in that the wheel response (i.e. the vehicle's rocking motion) is utilized to extract the torsional–flexural frequencies of the bridge, making use of the linking action between the vehicle's two wheels and the bridge's cross section. The reliability of the theory and proposed technique is numerically validated for parameters such as damping of the vehicle and bridge, bridge/vehicle mass and frequency ratios, pavement roughness, and vehicle speed. It was confirmed that the proposed technique is capable of extracting the first several flexural and torsional–flexural frequencies of the thin-walled beam, including some higher conjugate modes, for all the cases studied herein.

Analysis for complicated boundary constraint of rubber bushing on rear torsion beam

Analysis of dynamic load of vehicle bumping at bridge-head using distributed spring-damper element

FEM analysis of vehicle-bridge vibration considering bridge deck's vibration

NONLINEAR FE ANALYSIS FOR RUBBER COMPOSITE STRUCTURES

Simulation of the Vertical Bending Fatigue Test of a Five-Link Rear Axle Housing

Flexural Vibration Analysis of Nonuniform Double-Beam System with General Boundary and Coupling Conditions

Finite Element Analysis on the Rear Axle Housing of Vehicle

Elastokinematics and Compliance of a Rectilinear Rear Independent Suspension

Rigid-Elastic Coupling Modelling Of Air Suspension And Fatigue Life Prediction Of Its Key Part For Heavy-Duty Truck

Free vibration analysis of elastically connected multiple-beams with general boundary conditions using improved Fourier series method

Research of section torsion beam based on multi-body dynamics

A Novel Constitutive Model of Carbon Black Rubber for the Numerical Analysis of Press-Fitting of Rubber Bushing

Influence of structure and material on the vibration modal characteristics of novel combined flexible road wheel

Modeling Method of Constitutive Law of Rubber Hyperelasticity Based on Finite Element Simulations

Vibration Analysis of Bridge Subjected to a Moving Elastic Vehicle Ith Flexible Connections

Performance Analysis of Vibration Isolation of Powertrain Mounting System Using Finite Element Method

Vibration Analysis and FEM model of Hollow Circular Beam with Constrained Damping Layer

Exact Solution of Free Vibration of A Uniform Tensioned Beam Combined with Both Lateral and Rotational Linear Sub-Systems

Rear Axle Housing Analysis Based on Simulation of Dynamic Vehicle Model

Finite Element Analysis of Engine Vibration Isolation Rubber Mount

Furthering extraction of torsional–flexural frequencies for thin-wall beams from the rocking motion of a two-wheel test vehicle