Abstract:The main material of a type of multifunctional warhead is energy-containing material, which mainly relies on the projectile's own kinetic energy to hit the target plate to achieve the function of penetrating reinforced concrete, so it needs the bullet material to have high strength and be able to withstand the high overload when penetrating reinforced concrete. At present, the composite energy-containing material structure with Al, Zr, Ti, and other materials as PTFE-based reducing agents is the mainstream direction of research on high-strength energy-containing materials. LS-DYNA is used to establish a simulation model to simulate and analyze the tapping power. The relationship curve between material strength and attack depth is established and compared with the experimental data of traditional steel material attack ammunition to finally determine the strength limit of energy-containing material compared with traditional attack ammunition. The simulation results show that the composite energy-containing material multifunctional projectile can accomplish the tapping task of penetrating 1.2 m reinforced concrete under the premise of ensuring that the percentage of W powder is not higher than 80%. This study has a certain reference value for the selection of energy-containing materials for multifunctional warheads. For the low-velocity penetration below 400 m/s, the effect of frictional resistance of the head as well as the sidewall on the penetration depth can be ignored, but the overload curve when considering the sidewall friction is more realistic. Using a combination of experimental and theoretical methods, the influence of the projectile material on the mass erosion of high-speed kinetic energy projectiles was studied, and the Jones erosion model based on the thermal melting principle was improved. Based on the cavity expansion theory, the calculation method of the shape evolution of the bullet head was established. The comparison with the experimental results shows that the improved model is applicable to different types of soft and hard materials and can accurately calculate the mass erosion amount, erosion depth, and shape evolution of the bullet head.

Numerical Simulation of Damage Effect of KE-rod to TBM Warhead

Numerical simulation of the disk fragment impacting resistance of plate target

Strain-rate-dependent Cohesive Zone Modelling of Charge Damage Behavior when a Projectile Penetrates Multilayered Targets

Functional Damage Assessment Method for Preformed Fragment Warheads to Evaluate the Effect on the Phased-Array Antenna

Influence of structure parameters on performance of discrete rod warhead

Computer Simulation of Dynamic Brittle Damage Process in Arch Dam Due to Blast Load

Impact Simulations on Local Damage of Reinforced Concrete Panel Influenced by Projectile Nose Shape

DAMAGE OF COMPOSITE UNDER LOW-VELOCITY IMPACT AND APPLICATION OF MECHANICAL EQUIVALENT MODEL

Numerical Simulation of Multifunctional Projectile Penetrating Reinforced Concrete Target Plate Based on Sensor Data Acquisition

Numerical simulation on concrete target penetrated by warhead of different titanium alloy shaped charge

Numerical simulation on steel box damage under internal explosion by smoothed particle hydrodynamics

Numerical simulation for the dynamic failure process in brittle materials

Numerical Simulation of Effect of Initiation Position on Directed Performance of Warhead Fragment

Dynamic Failure Simulation of Metal Materials and Structures under Blast and Impact Loading

Macroscopic and mesoscopic simulation of damage behavior for CF/BMI laminates induced by rectangular cross-sectional TC4 flyer high-speed impact

Low speed impact simulation of explosive charge based on three-dimensional numerical manifold method

Numerical Simulation and Analysis of Shelled Explosive Penetrated but Not Detonated

Numerical Simulation of Rigid Projectiles Penetration into Concrete Targets with Different Warhead Shapes

Numerical Simulation of the Effect of Blast Shock Wave on Target Plate

Numerical Simulation Of Dynamic Responses Of Discrete Multilayered Wound Ribbon Vessels Subjected To Internal Explosion Loading

Perforation of carbon fiber-wound composite cylinders struck by hemispherical and conical-nosed impactors