Effects of Different Austenitizing Times on the Microstructure and Properties of Cr‐Ni‐Mo‐V Series High‐Strength Steels
Liu Zhang,Shumeng Lu,Qian Cheng,Shanju Zheng,Mengnie Li,Zhongdong Xu,Yuanlong Xi
DOI: https://doi.org/10.1002/srin.202400731
IF: 2.1258
2024-11-01
steel research international
Abstract:By controlling the austenitizing time, the microstructure of the subsequent heat treatment is improved, thereby improving the overall mechanical properties. Moreover, the austenitizing time can change the microstructure structure and the distribution of carbides, so that the material reduces the crack expansion area, effectively prevents crack expansion, and enhances the mechanical properties of the material. Herein, the effects of varying austenitizing times on the microstructure and mechanical properties of Cr‐Ni‐Mo‐V series high‐strength steel are investigated, discussing the mechanisms that enhance strength and toughness. By controlling the austenitizing duration, the microstructure during subsequent heat treatments is improved, leading to enhanced overall mechanical properties. The experimental steel undergoes treatments at different austenitizing times, and the microstructure is characterized using optical microscopy, energy‐dispersive spectroscopy, field emission scanning electron microscopy, and X‐ray diffraction. Mechanical properties are assessed through tensile testing, impact testing, and microhardness measurements. The results indicate that, when comparing an austenitizing time of 1 to 1 h and 15 min, the ultimate tensile strength decreases by 10%, microhardness reduces by 78.2 HV, elongation increases by 1.39 times, and toughness improves by 80%. The enhancement in toughness is primarily attributed to the synergistic effect of tempered martensite and bainite within the microstructure. Fracture morphology analysis reveals that variations in austenitizing time affect carbide distribution, accelerate carbide dissolution, decrease the crack growth zone, and enhance toughness. This study provides valuable insights for designing Cr‐Ni‐Mo‐V series high‐strength steels with optimal strength‐toughness synergies.
metallurgy & metallurgical engineering