Abstract:The performance of the Reduced And INternally Biased Oxide Wafer (RAINBOW) actuator developed by Haertling, as explained by many authors, mainly owes to the special behaviors of domains under the high internal stress status. The finite element method (FEM) was the one used by Haertling's group to simulate the internal stress in RAINBOW and its dome shape of RAINBOW and their FEM simulation results can explain some experimental results of RAINBOW actuator. In this paper, a simple model is presented to evaluate the internal stress and dome shape of RAINBOW actuator on the basis of the two step formation of RAINBOW structure. The internal radius stress and structural deformation of RAINBOW actuators with different geometrical dimensions were calculated by the present model. The results show good agreements with that of FEM simulation by Haertling and by us. Moreover, the optimal thickness ratio (the reduced layer/total) of the RAINBOW actuator. which represents the highest displacement induced by an electric field in its symmetric axial, can be directly determined from this model (the optimal thickness ratio is about 0.33, close to that calculated by FEM). This model has a clear physical meaning, explaining easily the non-uniform stress in the RAINBOW actuators from the physical point view, and is very useful for the RAINBOW actuator designs. These advantages are not so easily obtained by FEM. From the point of view of the presented model, the origin of the strain-amplifying mechanism of the RAINBOW was preliminarily considered to be due to the structural geometry of the unique dome shape.

PREPARATION AND PROPERTIES OF RAINBOW ACTUATOR

Study Progress of RAINBOW Piezoelectric Ceramics for Large Displacement Actuators

ACTUATOR OF LARGE DISPLACEMENT RAINBOW CERAMICS

Internal stress and structural geometry calculations of a RAINBOW actuator

Sodium Bismuth Titanate-Based Lead-Free RAINBOW Piezoelectric Devices

Reduction Behavior of Pzn-Pzt Piezoelectric Ceramics Reduced by Graphite under High Temperature

Excellent Uniformity and Properties of Micro-Meter Thick Lead Zirconate Titanate Coatings with Rapid Thermal Annealing

Study on Fabrication and Properties for a Novel Micro-actuated Element

Preparation and characterization of piezoelectric diaphragm actuator based on ring-shaped interdigitated electrodes

Lead Lanthanum Zirconate Stannate Titanate Based Antiferroelectric to Ferroelectric Phase Switching Multilayer Ceramic Actuators

Fabrication and Evaluation of Porous Piezoelectric Ceramics and Porosity–Graded Piezoelectric Actuators

Preparation and Properties of Piezoelectric Elements by Sol-Gel Process for Micro-actuator Application

Design and Experimental Study of a Planar Piezoelectric Actuator with Resonant Actuation

Preparation and Characterization of In-Plane Polarized PZT Piezoelectric Diaphragms

Analysis and Experimental Research of a Multilayer Linear Piezoelectric Actuator

Pulsed Laser Deposited Lead Zirconate Titanate Thin Films for Micro Actuators

Design and Fabrication of Functionally Graded Pzt/Pt Piezoelectric Bimorph Actuator

Lead Free Multilayer Piezoelectric Actuators by Economically New Approach

Fabrication and FEM Analysis of a Piezoelectric Thin-Film Microactuator

Design And Fabrication Of A Large Displacement Piezoelectric Actuator

Potentiostatic Dealloying Fabrication and Electrochemical Actuation Performance of Bulk Nanoporous Palladium