Abstract:Three-dimensionally coupled computational fluid dynamics (CFD) and discrete element method (DEM) are used to investigate the gas–solid hydrodynamics and mixing characteristics of a three-dimensional rectangular bubbling fluidized bed. The numerical study is conducted referring to the quasi-3D experimental apparatus investigated by Goldschmidt et al. [1]. The simulation results turn out that time-averaged solid volume fraction and instantaneous particle height agree well with the experimental data. To investigate the solid behavior, the solid velocity and flux distribution are extracted and the influence of the gas velocity on the solid velocity is discussed. It is found that higher gas velocity induces the formation of double-recirculation pattern in which solid phase mainly moves from the near wall region to the central region in the lower bed and oppositely in the upper bed. At the same time, the solid mixing is faster under higher inlet velocity, and that particles in vertical directions tend to mix better than those in lateral directions. At last, we find the particle dispersion coefficient is very anisotropic in three normal directions. In accordance with the results of most experiments, the geometry structure strongly influenced the coefficient value. We also find when inlet gas velocity is higher, the dispersion coefficient increases, for the particle velocities are higher due to greater momentum exchange.

Virtual Demonstration Study of Fluidized Bed Combustor

Numerical Simulation of a Vortex Combustor Firing Dry Ultrafine Coal at 0.6 MW Thermal Input

Experimental and Numerical Study on Temperature Variation and Air Flow Distribution in Trapped Votex Combustor

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Numerical Simulation of the Combustion and Pollution Emissions from a 75/th Circulation Fluidized Bed Boiler of Power Plant

SIMULATION OF GASEOUS COMBUSTION AND HEAT TRANSFER IN A VORTEX COMBUSTOR

CFD-DEM Simulation of Heat Transfer in Fluidized Beds: Model Verification, Validation, and Application

A Simulated Study on the Combustion and Emission Performances of Diesel Engines

Simultaneous three-dimensional measurement of temperature and velocity fields in swirling combustion

Numerical Simulation of the Effects of Center Tube and Multiple Air Injection on the Gas Flow Field in a Vortex Combustor

Three-Dimensional Simulation of Steam Injected Gas Turbine Combustor Inner Flowfield Characteristics

A Visual Study of the Gas Solid Dual Phase Flow Characteristics in a Circulating Fluidized Bed

CFD–DEM Study of Mixing and Dispersion Behaviors of Solid Phase in a Bubbling Fluidized Bed

Numerical modeling of three-dimensional flow field and two-dimensional coal combustion in a cylindrical combustor of co-flow jets with large velocity difference

DYNAMIC MATHEMATICAL MODEL OF PRESSURIZED FLUIDIZED BED COMBUSTOR

Numerical investigation of the back-mixing and non-uniform characteristics in the three-dimensional full-loop circulating fluidized bed combustor with six parallel cyclones

Virsual Experimental Research on the Air Dynamic Field in Outerlet of Co-Axial Swirl Stratified Flow Burner

Modeling of a 300 MW Circulating Fluidized Bed Boiler

Dynamic Modeling and Simulation of CFB Boiler

AN EXPERIMENTAL AND NUMERICAL STUDY ON SWIRLING COMBUSTION PROCESS IN A 200MW PULVERIZED COAL FIRED BOILER

Swirling, Reacting, Turbulent Gas-Particle Flow In A Vortex Combustor