Solid Phase Extraction and Preconcentration of Trace Heavy Metal Ions in Natural Water with 2,2′‐Dithiobisaniline Modified Amberlite XAD‐2
Yongwen Liu,Xijun Chang,Yong Guo,Bingjun Ding,Shuangming Meng
DOI: https://doi.org/10.1080/07366290500174891
2007-01-01
Solvent Extraction and Ion Exchange
Abstract:A solid phase extraction and preconcentration methodology utilizing a new chelating resin is described for the separation of Cd, Ni, Co, Cu, and Zn. The chelating resin matrix was prepared by covalently linking 2,2'-dithiobisaniline synthesized from 2-aminothiophenol with the benzene ring of polystyrene-divinylbenzene resin Amberlite XAD-2 through a -N=N- group. Its adsorption and preconcentration behavior for Cd, Ni, Co, Cu, and Zn in aqueous solution was studied using batch and column procedures in detail. The newly designed resin quantitatively adsorbs Cd, Ni, Co, Cu, and Zn above pH 5.0. Subsequent elution with 2 M HCl readily strips the sorbed metal ions from the resin. The sorption capacity is 360, 230, 170, 200, and 150 mol g(-1) for Cd, Ni, Co, Cu, and Zn, respectively. Their preconcentration factors are 80-200. The time for 80% sorption was less than 10 min for all five metal ions. The effects of electrolytes on the preconcentration were also investigated with the recoveries >95%. The procedure was validated by analysis of a standard reference river sediment material (GBW 08301 China). The developed method was successively utilized for the determination of Cd, Ni, Co, Cu, and Zn in tap water and river water by flame atomic absorption spectrometry (FAAS) after column SPE and preconcentration. The 3 sigma detection limits for these metal ions were found to be 0.10, 0.34, 0.42, 0.16, and 0.52g L-1, respectively. The relative standard deviation was <10% for the determination of 10 g each of Cd, Ni, Co, Cu, and Zn in a 100 mL water sample.