Abstract:As the most widely used building material, cement has attracted the attention of scholars because of its large carbon emission. To alleviate the problems of carbon emission and limited resource use caused by cement production, this study focuses on the performance of mortar after carbonization curing by regulating the composition of ternary binders. Testing involved mechanical parameters, carbon shrinkage, water absorption, hydration product, microstructure, adsorption of carbon dioxide, calcium carbonate content, and carbonization degree of mortar, as well as comparisons with the effect of calcium carbide slag and sintered red mud. We carried out several studies which demonstrated that carbonization curing and adjusting the content of calcium carbide slag and sintered red mud were beneficial to improve the mechanical properties, peak load displacement, slope, elastic energy, plastic energy, carbon shrinkage, carbon dioxide adsorption, calcium carbonate content, and carbonization degree of mortar, while the addition of calcium carbide slag and sintered red mud increased the water absorption of mortar, and the greater the dosage, the greater the water absorption. Meanwhile, adding 25%–50% calcium carbide slag and sintered red mud still had negative effects on the mechanical properties of mortar. But carbonation curing and the addition of calcium carbide slag and sintered red mud could promote the hydration reaction and consume calcium hydroxide formed by hydration to form calcium carbonate. When the dosage was 50%, the carbon dioxide adsorption capacity, calcium carbonate content, and carbonization degree of calcium carbide slag mortar were higher than those of sintered red mud mortar, which increased by 29.56%, 102.73%, and 28.84%, respectively. By comparison, calcium carbide slag and sintered red mud still showed superior carbon sequestration capacity, which was higher than fly ash and Bayer red mud. From the experiment, we came to realize that adjusting the composition of cementitious materials could realize the carbon sequestration of cement-based materials and promote the road toward low-carbon sustainable development of cement.

Study on Red Mud Used As a Property Modifying Mineral Admixture for High Performance Cement

Effects of Red Mud on Workability and Mechanical Properties of Autoclaved Aerated Concrete (AAC)

The Synergy Effect of Limestone Powder and Mineral Admixtures on the Mechanical Property of Mortar

Study on Mechanism of Muddy Soil Stabilization

Effect of Red Mud on Mechanical Properties of Loess–Containing Aluminosilicate Based Cementitious Materials

Influence of Red Mud on the Engineering and Microstructural Properties of Sustainable Ultra-High Performance Concrete

Preparation mechanism and properties of thermal activated red mud and its geopolymer repair mortar

Properties of Red Mud Blended Magnesium Phosphate Cements: Workability and Microstructure Evolution

Experimental Investigation on Red Mud from the Bayer Process for Cemented Paste Backfill

Investigation on properties and mechanism of non-calcined Bayer red mud-phosphogypsum cementitious binder

Properties of Red-Mud-Modified Basic Magnesium Sulfate Cement

Utilization of Red Mud with High Radiation for Preparation of Autoclaved Aerated Concrete (AAC): Performances and Microstructural Analysis

Preparation of building materials from Bayer red mud with magnesium cement

Strengthening Mechanism of Red Mud with Calcium Oxide

Comprehensive Utilization of Red Mud in Building Materials

Evaluation of blends bauxite-calcination-method red mud with other industrial wastes as a cementitious material: properties and hydration characteristics.

The Use of Slag and Red Mud for the Synthesis of a Slag-Based Cementitious Material

Experimental Research on Magnesium Phosphate Cements Modified by Red Mud

Improving the Performance of Mortar under Carbonization Curing by Adjusting the Composition of Ternary Binders

Sustainable use of red mud in ultra-high performance concrete (UHPC): Design and performance evaluation

Effect of composite activators on mechanical properties, hydration activity and microstructure of red mud-based geopolymer