Abstract:Reverse engineering technology has been widely recognized as a crucial strategy for innovative design of products. However, currently one of major problems for its application is that huge amounts of digitized points cloud data need to be processed for geometrical surface modelling, especially for unknown free-form surfaces which are widely used in industry fields such as aircraft, automobile, shipbuilding, steam turbine, etc. In order to digitize unknown free-form surfaces accurately and efficiently, an adaptive sampling approach based on advanced path detecting has been presented. The method is characterized by integrating one touch- trigger probe and two laser probes onto the same Z axis of Coordinate Measuring Machine (CMM), and the two laser probes are located on both sides of the touch probe. During sampling, the CMM scans the free-form surface line by line. At the scanning direction, the laser probes are applied to collect the measuring path information in front of the touch probe. And the data acquired by the laser probes is processed and fitted into B-spline curves real-timely, and then the curvature feature of the measuring path is extracted. The obtained path information is used to generate a new measuring path for touch probe to achieve adaptive sampling. While at the cross-section feeding direction, curvature analysis algorithm based on the angle variation between measuring sections is employed to subdivide the cross-sections when needed. Repeating this procedure, the measuring sections will be distributed adaptively. Simulation and experiment results indicate that the sampling points generated by the touch probe are laid out rationally according to the curvature of the surfaces, therefore the sampling efficiency and accuracy can be improved significantly by the proposed approach.

Accuracy Verification of Sculptured Surface Machining

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

Research on the non-contact measurement of unknown freeform surface and determining its key geometric characteristics

Discrete Model Based Analysis Algorithm for Surface Smoothness

Swept volume solid modeling of revolutions on curved trajectories

Accurate Solid Modeling Based On Curved-Surface

Machined Nurbs Surface Description Using On-Machine Probing Data

Adaptive Sampling of Digitizing Based on Geometric Characteristics of Trimmed NURBS Surface

A Novel Method of Efficient Machining Error Compensation Based on Nurbs Surface Control Points Reconstruction

An Adaptive Sampling Approach for Digitizing Unknown Free-form Surfaces Based on Advanced Path Detecting

An accuracy evolution method applied to five-axis machining of curved surfaces

An accurate surface error optimization for five-axis machining of freeform surfaces

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

Analysis of toolpath curvature influence on sculptured surface contour error

Error Compensation of Free-Form Surface with Critical Area Based on T-spline Surface Reconstruction.

Research on Surface Modeling of Turbo Vane of Vehicle Based on NURBS

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Non-equidistant Scanning Path Generation for the Evaluation of Surface Curvature in Metrological Scanning Probe Microscopes

Advanced Curve and Surface Design in Cad-System Using Step

Volumetric Error Modeling And Analysis For Cnc Machine Tool Based On Multi-Body System

Machining Error Inspection of T-spline Surface by On-Machine Measurement