Abstract:The full two-dimensional Navier-Stokes algorithm and the SST k-? turbulence model were used to investigate incom-pressible viscous flow past the wind turbine two-dimensional airfoil under clean and roughness surface conditions. The NACA 63-430 airfoil is chosen to be the subject, which is widely used in wind turbine airfoil and generally located at mid-span of the blade with thickness to chord length ratio of about 0.3. The numerical simulation of the airfoil under clean surface condition has been done. As a result, the numerical results had a good consistency with the experimental data. The wind turbine blade surface dust accumulation according to the operational periods in natural environment has been taken into consideration. Then, the lift coefficients and the drag coefficients of NACA 63-430 airfoil have been computed under different roughness heights, different roughness areas and different roughness locations. The role that roughness plays in promoting premature transition to turbulence and flow separation has been verified by the numeri-cal results. The trends of the lift coefficients and the drag coefficients with the roughness height and roughness area increasing have been obtained. What’s more, the critical values of roughness height, roughness area, and roughness location have been proposed. Furthermore, the performance of the airfoil under different operational periods has been simulated, and an advice for the period of cleaning wind turbine blades is proposed. As a result, the numerical simula-tion method has been verified to be economically available for investigation of the dust effect on wind turbine airfoils.

Influence of Roughness on Aerodynamic Performance of Dedicated Wind Turbine Airfoil

Numerical Analysis of Leading-Edge Roughness Effects on the Aerodynamic Performance of a Thick Wind Turbine Airfoil

Numerical simulation of surface roughness effect on wind turbine thick airfoils

NUMERICAL SIMULATION FOR PNEUMATIC CHARACTERISTICS FOR TWO-DIMENSIONAL AIRFOILS LARGE WIND TURBINE

Effect and Mechanism of Roughness on the Performance of a Five-Stage Axial Flow Compressor

Investigation on roughness sensitivity for 21% relative thickness airfoil of wind turbine blade

ROUGHNESS SENSITIVITY ANALYSIS AND OPTIMIZATION OF CAS AIRFOILS USED AT OUTBOARD SECTION OF WIND TURBINE BLADE

AERODYNAMIC PERFORMANCE INFLUENCE WITH ROUGHNESS ON WIND TURBINE AIRFOIL SURFACE

Roughness Effects on Flow Losses of a High-Lift Low-Pressure Turbine Cascade

Dust Effect on the Performance of Wind Turbine Airfoils

INFLUENCE OF ADDITIONAL ROUGH STRAP OF WIND TURBINE AIRFOIL LEADING EDGE SURFACE ON AERODYNAMIC PERFORMANCE

A Study on Performance Influences of Airfoil Aerodynamic Parameters and Evaluation Indicators for the Roughness Sensitivity on Wind Turbine Blade

Impact of Surface Roughness of Wind Turbine Airfoil Leading Edge on Aerodynamic Performance

Experimental and Numerical Investigation of the Influence of Roughness and Turbulence on LUT Airfoil Performance

Effects of Simulated Surface Roughness on Flow Characteristics in Symmetrical Airfoil

Numerical Simulation of Aerodynamic Performance of Film Cooling on A Flat Plate with Surface Roughness

Effects of Surface Roughness and Turbulence Intensity on the Aerodynamic Losses Produced by the Suction Surface of A Simulated Turbine Airfoil

Numerical investigation of blade roughness impact on the aerodynamic performance and wake behavior of horizontal axis wind turbine

EXPERIMENT AND ANALYSIS OF AERODYNAMIC PERFORMANCE FOR CAS THIN AIRFOILS USED OF WIND TURBINE BLADES

THE INFLUENCE OF MODAL SURFACE ROUGHNESS ON WIND LOADS OF COOLING TOWERS

Numerical Analysis of Atmospheric Turbulence Effects on Wind Turbine