Abstract:When tower cranes are applied in coastal engineering, the wind-induced vibration under complex wind loads along the coast will be exceptionally obvious. It is increasingly important to explore the wind-induced vibration characteristics of different sections of tower cranes under full wind angles. This paper first establishes a three-dimensional numerical wind tunnel model that can be used for the simulation of tower cranes under full wind angles and analyzes the aerodynamic load variation of the tower crane under full wind angles. Secondly, the tower crane structure is divided into sub-regions, and the AR model method in the linear filtering method is used to simulate the three-dimensional wind speed time history. Further, the wind speed time history is applied to the finite element transient analysis, and based on the Newmark-beta method, the acceleration and displacement responses of different sections of the tower crane structure under fluctuating wind are systematically studied. Finally, the equivalent static wind load of different sections of the tower crane is evaluated by using the gust load factor method. The results indicate that the wind load of the tower crane exhibits an obvious three-dimensional effect, and the crosswind load cannot be ignored in the analysis of wind stability. The different sections of the tower crane structure show low-frequency vibration characteristics, and the low-frequency band is dominated by down-wind vibration, while the high-frequency band often experiences crosswind vibration. The amplification effect of the tower crane on fluctuating wind loads will increase with the increase of the height of the tower crane and the length of the jib, and the amplification effect on fluctuating wind loads in the crosswind direction is more obvious. The equivalent static wind load on the top of the tower crane reaches the maximum when the angle between the jib and the incoming wind is 60°.

Dynamic modeling and characteristics analysis of tower crane load oscillation

Dynamic Analysis of Full-Circle Swinging Hoisting Operation of a Large Revolving Offshore Crane Vessel under Different Wave Directions

Study on Dynamic Characteristics of the Ower-Foundation of 1.5 MW Wind Turbine

Dynamic Response Analysis of Deployable Lifting Construction Process of Reticulated Shell Structures

Research and Analysis on Dynamic Properties of Spatial Rod-cable Deployable Structure

Research on Dynamic Characteristics of Composite Towering Structure

Aerodynamic Load Variation and Wind-Induced Vibration Analysis of Tower Cranes Under Full Wind Angles

Spherical pendulum model with a moving suspension point in the problem of spatial load movement by a hoisting crane with oscillation limiting

Modeling and energy-based sway reduction control for tower crane systems with double-pendulum and spherical-pendulum effects

Finite element analysis of complete structure of tower cranes

Dynamic model test on monopile for offshore wind turbine under jointed lateral environmental load and seismic load

RESEARCH ON THE LOAD oF OFFSHORE WIND TURBINE'S TOWER AND FOUNDATION

Nonlinear Finite Elment Analysis On The Loading Behavior Of Tower Type Oiling Derrick

Decoupled linear model and S-shaped curve motion trajectory for load sway reduction control in overhead cranes with double-pendulum effect

Modelling and Dynamic Characterisation of a Double-Pendulum Overhead Crane Carrying a Distributed-Mass Payload

Spherical pendulum small oscillations for slewing crane motion

A Hybrid Control Mechanism for Stabilizing a Crane Load under Environmental Wind on a Construction Site

Dynamic analysis and optimization of a wind turbine tower subject to wind and earthquake loads

Oscillation Reduction for Knuckle Cranes

Analysis of Static and Dynamic Characteristic for Gantry Crane

Adaptive sliding mode anti-swing control of 4-DOF tower crane based on a nonlinear disturbance observer