Abstract:This study focuses on the properties of polyaniline (PANI) thin deposited onto glass substrates using a chemical bath method. The films were prepared under the same conditions, except for the type of oxidant used. Three oxidants were utilized: potassium per-sulfate (KPS), sodium per-iodate (NAIO 4 ), and ferric chloride di-hydrated (FeCl 3 ·2H 2 O). X-ray diffraction (XRD) analysis confirmed that all deposited films had an amorphous structure. Fourier-transform infrared spectroscopy (FT-IR) confirmed the presence of PANI films, as indicated by the recorded peaks. Scanning electron microscopy (SEM) was employed to study the surface structure and morphologies of the films, revealing nano-structured grains with varying average grain sizes depending on the oxidant type. The elemental composition of the films was analyzed using X-ray photoelectron spectroscopy (XPS). The optical band gap values were determined to be 4.06 eV, 3.93 eV, and 3.96 eV for FeCl 3 ·2H 2 O, NAIO 4 , and KPS oxidants, respectively. The refractive index and extinction coefficient were also calculated from optical data, showing significant variations with changes in the oxidant type. The high frequency dielectric constant of the films was estimated using the Spitzer-Fan model, resulting in values of 5.15, 3.24, and 474 for FeCl 3 , NAIO 4 , and KPS oxidants, respectively. Additionally, cyclic voltammetry studies revealed that PANI/glass films grown using NAIO4 exhibited the highest specific capacity. Further investigation of PANI/FTO/glass films showed a specific capacity estimated to be 100 Fg-1 for this particular film configuration.

Preparation of Electrochromic and Transparent Film of Polyaniline

A study of Electrochromic thin films and Devices by Photothermal Deflection Technique

A Very Thin Layer of NiO, Ni(OH)2 Nanosheets Arrays with Organic Functional Modification of Polyaniline

Preparation and Physical Properties of Electrochromic Thin Films Based on Polyaniline Derivatives

Polyaniline Electrochromism Film Synthesized by Electrochemical Method

Electrochromism of Polyaniline: An In Situ FTIR Study

Preparation and Electrochromism of Polyaniline Films by in-situ Polymerization

Preparation of Polyaniline Films and Their Conductivity

A highly porous NiO/polyaniline composite film prepared by combining chemical bath deposition and electro-polymerization and its electrochromic performance

Preparation of Multicolor Electrochromic Polymer Composite Film with Laminated Structure

Near-Infrared and Multicolor Electrochromic Device Based on Polyaniline Derivative

Research Progress of Transparent Conductive Polyaniline Composite Films

Patterned Polyaniline Encapsulated in Titania Nanotubes for Electrochromism.

Hybrid Electrochromic Film Based on Polyaniline and TiO2 Nanorods Array

Soluble polymer facilely self-grown <i>in situ</i> on conducting substrates at room temperature towards electrochromic applications

Polyaniline Electrochromic Devices with Transparent Graphene Electrodes

Fabrication of the Infrared Variable Emissivity Electrochromic Film Based on Polyaniline Conducting Polymer

In Situ Preparation and Determination of Electrochemical and Electrochromic Properties of Copper Phthalocyanine-Polyaniline Nanocomposite Films

Preparation of Electrochromic Polythiophene and Fabrication of Corresponding Solid-State Electrochromic Device

Tailoring physical properties and electrochemical performance of polyaniline thin films via chemical bath deposition

Comparative study of electrochromic properties of polyaniline-polyacid layers prepared by spray- coating and drop-casting methods with adding carbon nanotubes