Abstract:CO2-based binary mixtures are considered good alternative working fluids in the refrigeration and power cycle due to their excellent performance and environmental friendliness. The vapor-liquid phase equilibrium of CO2-based binary mixtures is the basis for calculating mixing enthalpy and heat capacity, which is essential for thermodynamic analysis. In this work, based on the vdW mixing rules, we proposed a kij model (kij=θjki-θikj). In the proposed model, ki and kj are defined as pure interaction factors of the pure components, θj is the influence factor of component j to component i, and θi is the influence factor of component i to component j. After continuous fitting and trial calculation, we developed a semi-empirical formula, which is called a temperature-independent prediction model. The model does not have any adjustable parameters, which are only related to the physical properties (critical pressure (kPa), critical temperature (K), and acentric factor) and molecular structure (carbon-carbon double bonds, carbon-fluorine, chlorine, iodine, and oxygen atoms) of the components. The temperature-independent prediction model can predict the bubble-point pressures, vapor phase molar fractions, and relative volatilities very well, which is better than the prediction model based on the vdW mixing rules by others and the group contribution model based on the excess free energy (GE) mixing rules (PR+MHV1+UNIFAC). The total average absolute relative deviation of pressures, the total average absolute deviation of vapor phase molar fractions, and the total average absolute relative deviation of relative volatilities by the temperature-independent prediction model are 2.23%, 0.0095, and 5.21%, respectively.

THE CALCULATION OF ICL EQUATION OF STATE USED AT THE CRITICAL POINT

Modification of co-volume parameter b in mixing rule for calculating vapor liquid equilibrium

A Modified Patel-Teja Equation of State for Cryogenic Fluids*

Investigation on the Vapor–Liquid Equilibrium for the Ternary Mixture HFC-32 + HFC-125 + HFC-161 at Temperatures from 265.15 K to 303.15 K

Isothermal Vapor-Liquid Equilibrium Of (Pentafluoroethane Plus Fluoroethane) At Temperatures Between (265.15 And 303.15) K Obtained With A Recirculating Still

Isothermal Vapor−Liquid Equilibrium of (Pentafluoroethane + Fluoroethane) at Temperatures between (265.15 and 303.15) K Obtained with a Recirculating Still

CALCULATION OF THERMODYNAMIC PROPERTIES OF HELIUM-3 BETWEEN 1K AND 100 K

A practical density equation for saturated vapor of helium-3 from 0.01 K to the critical point

Study on the vapor liquid equilibrium of binary-mixture refrigerants CO2/R600

A Corresponding State Equation for the Prediction of Isobaric Heat Capacity of Liquid HFC and HFO Refrigerants

Vapor−Liquid Equilibrium Data for the Binary Mixture Difluoroethane (HFC-32) + Pentafluoroethane (HFC-125) of an Alternative Refrigerant

An improved prediction equation of refrigerants surface tension based on the principle of corresponding states

Calculation of thermodynamic properties of square-well fluid including the critical region with an analytic equation of state

Isothermal vapor-liquid equilibrium data for the binary mixture trifluoroethane (HFC-143a) + ethyl fluoride (HFC-161) over the temperature range (253.15 to 303.15) K

New Correlation for Binary Interaction Parameters of Paraffins Mixtures

Experimental Isobaric Heat Capacity of Liquid HFC-32+HFO-1234ze(E) Mixture and Extension of a Predictive Corresponding State Equation to HFC Mixtures

A study on SAFT-CP for phase equilibria of fluid mixtures with a component near its critical point

Phase Equilibrium Calculation of Mixtures: Use of the SAFT-BACK Equation of State for Binary Systems under Elevated Pressure

Intermediate pressure optimum mathematical calculation model in the two-stage LiBr/H2O absorption refrigeration cycle.

A temperature-independent prediction model predicts the vapor-liquid equilibrium of CO2-based binary mixtures

Renormalization Group Theory Applied for Fluids and Mixtures up to Critical Region