Design and simulation of activated sludge system model
LIU Fang,ZHAO Chao-cheng,ZHANG Xiu-xia,GENG Chun-xiang
DOI: https://doi.org/10.3969/j.issn.1009-6094.2007.04.014
2007-01-01
Abstract:This paper has put forward an activated sludge system model(ASSM)based on the simplified bio-reaction dynamics model(SBDM)and the secondary clarifier model.As we know,the simplified bio-reaction dynamics model is mainly designated to describe the carbon oxidation process and nitrification process.Of the eight basic processes listed in the ASM1 model,only five are left in the SBDM model:growth as well as the decay of heterotrophs and autotrophs as well as hydrolysis.Furthermore,among the thirteen components only ten remained,that is,SI(soluble inert substrate),SS(soluble readily biodegradable substrate),XI(particulate inert substrate),XS(particulate slowly biodegradable substrate),XBH(heterotrophs),XBA(autotrophs),SO(soluble oxygen),SNH(ammonia),SNO(nitrate and nitrite)and SALK(alkalinity).Therefore,the number of components,processes and parameters of SBDM is actually fewer than that of ASM1.As a result,the difficulties arising in parameters identification and model application have been reduced with the model practicability being enhanced.At the same time,the secondary clarifier model based on the solids flux theory can provide a comprehensive description of the observed thickening function of the secondary clarifier,which can then be split into ten horizontal layers.Moreover,since the solids concentration in each layer of constant height can be calculated from a simple mass balance around each layer,the measurement of the components and parameters in ASSM can also be facilitated.And,finally,ASSM can be applied to simulate the operations of the practical wastewater treatment plants.In conclusion,the ASSM model is a good alternative of the on-line process monitoring,prediction,control and optimization as well as a practical tool for efficient and reliable model simulation.