Design and implementation of home network terminal

陈良银,黄彦辉,邓丽华,李征

DOI: https://doi.org/10.3969/j.issn.1003-2843.2004.06.032

2004-01-01

Abstract:The paper introduces the design and implementation approach of smart home network terminal based monolithic processor chip, and it accomplishes a remote smart home system through PSTN and Internet.

What problem does this paper attempt to address?

THE DESIGN AND ESTABLISHMENT OF THE HOME INTELLIGENT TERMINAL SYSTEM BASED ON S3C2410

刘志强

DOI: https://doi.org/10.3969/j.issn.1001-5167-b.2009.01.011

2009-01-01

Abstract:The intelligent terminal is an important part of the intelligent housing system.Its working conditions are decisive in securing both the stability and reliability of the whole system.The 32-bit structure microprocessor S3C2410 is chosen to be used as the main control chip.Power-line carried wave chip MI200 is adopted for downlink communications while GPRS/GSM is adopted for uplink communications.Through transplanting the Linux-embedded operation system and with the drive program,communication program and graph interface of Qt designed and developed for the Linux system,the intelligent terminal becomes a stable core of the intelligent housing system capable of multi-threading work and multi-selectable carrier frequency transition,which makes the operation of the system both stable and convenient.Tests within a small scope have been made with the system.It is found that the power-line data transmission proves to be very reliable,with reception rate achieving over 99.8%.The applicability of the system is expected to be very high.
Design of a Household Self-organized Heterogeneous Network Terminal

Lin Xiaokang

2013-01-01

Microprocessors

Abstract:Since household communication networks are increasingly complex and diverse,this paper proposed a new type of intelligent household terminal,with self-organized network structure based on WirelessHART and PLC.A low-cost and extendable heterogeneous network system terminal is designed and implemented through integrating PLC,WirelessHART and Ethernet into an embedded system for heterogeneous communication,intelligent electric appliance and so on.
The Design of Intelligent Network Control System for Domestic Electronic Devices

Qing-an TENG,Peng-ju HE

DOI: https://doi.org/10.3969/j.issn.2095-3046.2005.06.005

2005-01-01

Abstract:In the area of measurement and control, an intelligent network is a developing direction and hotspot in research. In this paper, an intelligent network control system of domestic electronic devices is brought forward. The system's three layers frame of network are given, which include household embedded network gateway of home with web server, device gateway, and RS485 field bus. The network interface and the key devices, such as the embedded web server, device gateway and the multi-function remote controller, are introduced. It is a practical system for budding intelligent domestic network.
Design of Intelligent Power Terminal System Based on Family Heterogeneous Network

Yunxiang Zhang,Houen Li,Zhuyi Rao,Wentong Zhang,Sheng Zhang

DOI: https://doi.org/10.1088/1757-899x/466/1/012076

2018-01-01

IOP Conference Series Materials Science and Engineering

Abstract:In order to achieve intelligent control of electrical equipment and save electricity, in this paper, we design an intelligent power terminal system based on family heterogeneous networks. Firstly, it exploits the function of intelligent power terminal system for protocol design, which is compatible with WirelessHART protocol, PLC communication and Ethernet communication. Then the hardware and software design of the system are described in detail. Finally, we verify the effectiveness of the proposed scheme through the simulations.
The network smart home system based on ZigBee technology

HAN Shuang-shuang,CHEN Wan-zhong,MENG Lin

2009-01-01

Abstract:In this paper,a programme is proposed,which is about the design and implementation of network smart home based on ZigBee.The whole system achieves communication within the family using ZigBee mesh network structure,it uses MC9S12NE64 chip to actualize data transmission of Ethernet--Serial port,to meet the purpose that interior network in the family can communicate with Ethernet,infrared technology and remote control are applied in the family at the same time,it truly accomplishes a low cost、networking and intelligentized management.
Analysis and Design of Home Gateway in Smart Home System

张明杰

DOI: https://doi.org/10.3969/j.issn.1671-1815.2009.07.060

2009-01-01

Abstract:Base on using the 89C-51 monolithic integrated circuit as the micro controller,and taking the network controller by network card TE-2008 main chip RTL8019AS,one kind of the home gateway scheme is proposed through which the home network can communicate with the Internet.It has been carried on for the principle,the software procedure,and the communication protocol being analysized about the scheme.
Design and Realization of Intelligent Network Interface in Remote Control System Based on Internet

BAI Jing,QIN Xian-sheng,WU Bin-yi,JIANG Li-ming

DOI: https://doi.org/10.3969/j.issn.1002-2279.2006.05.009

2006-01-01

Microprocessors

Abstract:Today there are more and more people focus on remote control based on internet.This article introduces the realization of hardware and software of the whole intelligent network interface.The hardware is based on TMSVC5402 DSP because of it's powerful function.We use the CS8900A to connect with internet.Also,the article analyzes in detail the design and realization of software.
The design and realization of home general control network

Hua Jiao,Jie Chen,Wei Wei

DOI: https://doi.org/10.1109/ICCT.2008.4716132

2008-01-01

Abstract:In this paper, we mainly present a general home network architecture, which can integrate various devices and networks. As a general interface, YT0101 communication board is a key component for the control network. It solidifies the standard communication protocol of home wired network. Various appliances can be accessed by home network after they are equipped with YT0101 interface board. We also give the design of Home Gateway, which completes the protocol conversion between networks, and provides the control and management to appliances. We aim to provide a standardization method to solve the network interconnection and device interoperability question.
Design of Intelligent Transaction Terminal Based on CMX865

CAI Jie,LIU Hao

DOI: https://doi.org/10.3969/j.issn.1004-373x.2007.24.054

2007-01-01

Abstract:With the development of Telecommunication technology,intelligent transaction based on PSTN become much usual.This paper proposes the method of making the Intelligent Transaction Terminal based on CMX865 modem and the embedded microprocessor— SEP3203F50.It mainly describes the hardware and software architecture of the terminal communication module.The function and parameter selection of the key components in the communication circuit are analyzed in detail.And the problems which should be noticed in the communication circuits when debugging also gave more attention.At present,the terminal has been passed the industry-related test.The results show the system is stable and reliable and have met product demand.
Design of Intelligent Network Interface in Remote Control System Based on Internet

王亮,白晶

DOI: https://doi.org/10.3969/j.issn.1007-080X.2007.01.012

IF: 3.379

2007-01-01

Mechatronics

Abstract:Integrating the theories of mechatronic control system and the technology of Internet,the composing and realization of the remote mechatronic control system are been discussed in this paper.The system's function was analyzed and the intelligent network interface was designed.The structure and the schematic of design were provided and the principle of software design was described also.
Design and Development of Embedded Intelligent Public Transport Vehicular Terminal

Changsheng Zhu,Jianbo Liang,Xugang Miao,Wenyi Feng

DOI: https://doi.org/10.1109/CCIE.2010.177

2010-01-01

Abstract:Intelligent public transport vehicular terminal is an important part of intelligent public transportation system. In view of the fact that the municipal transportation structure in our country and status of the public transportation-vehicular equipment, the paper presents a new type of system-design of the intelligent transportation vehicular equipment. System that is based the embedded intelligent transportation vehicular terminal and take the S3C2410A processor as the core is designed. The paper mainly makes the detailed introduction to this terminal's hardware platform design and software design based on the WINCE embedded operating system.
The Network Interface Design for the Remote Control System

ZHAO Baojian,QIN Xiansheng,JIANG Liming

DOI: https://doi.org/10.3969/j.issn.2095-347X.2006.04.008

2006-01-01

Abstract:The traditional resolution for the Internet access of the equipment usually needs a PC, it is expensive and too big in some situation. In this thesis, a cheap and small interface is provided. This interface is based on TMS320VC5402;it can communicate with Internet through RTL8019AS.
Design and Implementation of Socket-Based-Network Connections Smart Home System

Yu-Han Liu,Qian Hu,Min Xiao

DOI: https://doi.org/10.1109/IMCCC.2016.113

2016-07-01

Abstract:A smart home control system could link independent electric appliances together 'intelligently' and provide comprehensive, fast and smooth exchange of information. This system gives people real-time information control, which improves their life quality. In this study, an embedded smart home system based on socket network connections was designed using ARM9 development board and embedded Linux operating system. This system could control all the subsystems that are related with home life, such as light control and sound control. Based on C/S structure, the designed smart home system has rich hardware and software resources, low cost and low power consumption, as well as easy expansion, update and maintenance. This system has practical values.

Engineering,Computer Science
A Network Control System of Home Appliances Based on Embedded Techniques

GONG Chen,YING Teng-yun,YAN Gang-feng

DOI: https://doi.org/10.3969/j.issn.1002-6886.2007.05.018

2007-01-01

Abstract:Aimed at the need of network and intelligence of today's home electric equipments,a type of intelligence home appliances control system is invented,applying various techniques of wireless network.The system actualizes remote control,real-time monitor and other functions to home appliance,based on embedded techniques.This article introduces the design of the hardware and software of the system.
Design and Implementation of Real-Time Terminal for Household Connection

XIONG Guang-cai,WANG Zhi-feng,ZHANG Xin-jia,JI Guo-jun

DOI: https://doi.org/10.3969/j.issn.1000-8829.2012.03.021

2012-01-01

Abstract:The IOT(Internet of things) has become the worldwide key strategy.Intelligent household,which is closely related to human life,has broad market space and gives rise to comprehensive attention and active research.A suit of terminal for intelligent household usage is designed and implemented based on the application requirements of IOT in intelligent households.In the design,real-time performance and cost are taken specially consideration.eCos(embedded configurable OS) is adopted to make the best of the real-time design of OS,and the corresponding drivers are transplanted.Meanwhile,open source development can promote the IOT popularity in intelligent households.On considering the network structure of intelligent household,OLSR protocol is transplanted for route,which enhances the network robustness.As a result,the platform that supports the real-time transmission is constructed.As a whole,the suit of terminal is economic and good in real-time performance.
The Design and Implementation of Sip Multi-Domain Smarthome System

Lianfen Huang,Jianyuan Liu,Zhichao Huang,Bingbing Ding,Hezhi Lin

DOI: https://doi.org/10.2991/icecee-15.2015.223

2015-01-01

Abstract:Heretofore, most of SmartHome systems deliver related services basing on a family local area network, and are not yet mature in remote control. In connection with this problem, we propose a SIP multi-domain system with distributed architecture, extend SIP protocol's redirect registration and call, make a combination of SmartHome system and the internet, and help people access to their home internal networking whenever and wherever.
Design and Implementation of Smart Home System Based on OpenHAB

Nan Wang,Jian Yang

DOI: https://doi.org/10.3969/j.issn.1000-0755.2015.05.020

2015-01-01

Abstract:Owing to the barriers such as heterogeneous network, poor control, high cost, this paper designs and implements a smart home based on openHAB. The smart home system, which can realize automatic monitoring and intelligent control to the digital devices and smart appliances at house, uses Raspberry Pi as the embedded gateway and application server. By setting up a prototype system to test, the actual results show that it possesses good feasibility, flexible system performance management and integration of heterogeneous devices, in addition, it has low cost, low power consumption and strong stability.
Remote SmartHome System Based on Multi-Communication

ZHOU Liu-yang,GONG Wei-guo,YANG Li-ping,ZHANG Mei-qin,LI Zheng-hao

DOI: https://doi.org/10.3321/j.issn:1002-8331.2007.04.069

2007-01-01

Abstract:A kind of remote SmartHome system is introduced in this paper.This system,which adopts PIC16F877 as microprocessor and Internet,SMS and telephone as multi-communication way,may satisfies the need of ordinary family in home security,remote surveillance and remote household electrical appliances control.Designed embeded TCP/IP protocol on cheap microprocessor,realized the Web server function,and integrated the SMS and the telephone function in together are the systematic main characters.
Smart Home Prototype System for The Internet of Things

Cheng Yang,Wang Wei,Xie Guangming,Luo Wenguang

DOI: https://doi.org/10.7690/bgzdh.2013.11.026

2013-01-01

Abstract:This paper is based on the three-tier technical architecture of internet of things and the concept of "Cloud",and substitute the traditional concept that each home user uses one intelligent control terminal with a new autonomous intelligent home system model.This paper introduces the model of the smart home system architecture,implementation techniques and methods,and analyses the implementation of the system server based on the.NET framework and database SQL Server 2008.It is proved that the smart home prototype system can satisfy users' preferences and can work automatically,safely and steadily.It can serve many users at the same moment.Besides,the system is easy to be maintained,upgraded.It is also a low-cost and resources saving method.

Design and implementation of home network terminal

THE DESIGN AND ESTABLISHMENT OF THE HOME INTELLIGENT TERMINAL SYSTEM BASED ON S3C2410

Design of a Household Self-organized Heterogeneous Network Terminal

The Design of Intelligent Network Control System for Domestic Electronic Devices

Design of Intelligent Power Terminal System Based on Family Heterogeneous Network

The network smart home system based on ZigBee technology

Analysis and Design of Home Gateway in Smart Home System

Design and Realization of Intelligent Network Interface in Remote Control System Based on Internet

The design and realization of home general control network

Design of Intelligent Transaction Terminal Based on CMX865

Design of Intelligent Network Interface in Remote Control System Based on Internet

Design and Development of Embedded Intelligent Public Transport Vehicular Terminal

The Network Interface Design for the Remote Control System

Design and Implementation of Socket-Based-Network Connections Smart Home System

A Network Control System of Home Appliances Based on Embedded Techniques

Design and Implementation of Real-Time Terminal for Household Connection

The Design and Implementation of Sip Multi-Domain Smarthome System

Design and Implementation of Smart Home System Based on OpenHAB

Remote SmartHome System Based on Multi-Communication

Smart Home Prototype System for The Internet of Things