Abstract:High cost of custom-made conventional turbines and the lack of local manufacturing facilities have created significant obstacles to the development of Pico/micro hydroelectric schemes in the country. In this context it has been identified pump as turbine (PAT) electric schemes can have distinct advantages over conventional turbines because pumps are manufactured locally at mass scale and available in various sizes. But not all pumps are suitable for use as PAT because they have different design details and manufacturing qualities. The performance of a pump used as a turbine is assessed based on two primary parameters: turbine mode head and flow at the Best Efficiency Point (BEP). There are various methods available in the literature for predicting PAT theoretical head and flow at BEP. These methods aim to estimate how the pump will perform when used as a turbine. Despite these prediction methods, there is a consistent deviation of approximately ±20% between the theoretical estimates and the actual measured performance. This indicates that real-world conditions and factors not accounted for in theoretical models can significantly affect the performance of PAT systems. The primary objective of the present study was to measure the deviation between the actual performance and the predicted performance of two PAT systems in terms of head and flow at BEP. This deviation was then compared to the commonly mentioned figure of ±20% in the literature. The study focused on using what it considered to be the most accurate prediction method among those presented in the literature to estimate PAT head and flow at BEP and involved running reverse, 1.1 kW, and 1.6 kW direct-drive standard centrifugal type water pumps in a test rig to measure the actual performance of the two PATs. The results of the study showed a deviation of +27% and -22% between the actual measured head and flow at BEP, and the values predicted by the theoretical method. This deviation is slightly outside the commonly mentioned range of ±20% found in the literature, but this is not expected to have a detrimental effect on the generation of electric power. This implies that, even with the observed slight deviation, the prediction method used in this study can be satisfactorily employed to estimate PAT head and flow at BEP.

Application of Thermodynamic Method in Pump Efficiency Measurement, and Comparison with Conventional Method

Comprehensive Performance Measurement for Closed-circuit Variable Displacement Pump

Study On Transient Hydrodynamic Performance And Cavitation Characteristic Of High-Speed Mixed-Flow Pump

The efficiency test research on 1# unit of Xiaolangdi hydropower station

A Comparative Study between Theoretical and Measured Performance of Standard Centrifugal Pumps Running as Turbines

A precisive calculation method of volumetric and hydraulic efficiency of centrifugal pumps

Energy Balance Analysis for a Canned Motor Pump Used for Heat Supply System

A New Performance Evaluation Method for Solar Thermosyphon Systems

Review and optimization of main parameters of pump turbine in Xiangshuijian pumped-storage power station

AN APPROACH TO THE TEST METHOD OF THERMODYNAMIC PERFORMANCE FOR GAS-STEAM COMBINED CYCLE POWER PLANT

A method for analysing and evaluating the comprehensive conversion efficiency of Pumped Storage Power Station

Numerical study on the energy evaluation characteristics in a pump turbine based on the thermodynamic entropy theory

Hydraulic Pump Performance Test System Based on CAT Technology

Turbine Efficiency Test on a Large Hydraulic Turbine Unit

Performance Calculation and Analysis of Air Source Heat Pump Water Heater

On-site measurement and analysis on operational energy performance of electricity-driven water-to-water heat pumps for centralized space heating systems

Comparative Numerical Studies for the Flow Energy Dissipation Features in a Pump-Turbine in Pump Mode and Turbine Mode

A systematic and qualitative assessment method and software design for energy efficiency of typical electric machine systems with pumps and fans

A selected literature review of efficiency improvements in hydraulic turbines

Performance analysis and experimental verification of hydraulic driven axial flow pumps

Mixed-flow pump performance improvement based on circulation method