Abstract:The purpose of this paper is to investigate the performance improvement mechanism of a high power vertical centrifugal pump by using numerical calculations. Therefore, a comparative study of energy losses and internal flow characteristics in the original and optimized models was carried out with special attention to the hydraulic component matching. The optimized model (model B) was obtained by optimizing the vaned diffuser and volute based on the original model (model A), mainly the diffuser inlet diameter, diffuser inlet vane angle, volute channel inlet width and volute throat area were changed. Firstly, the comparative results on performance and energy losses of two models showed that the efficiency and head of model B was significantly increased under design and part-load conditions. It is mainly due to the dramatic reduction of energy loss P L in the diffuser and volute. Then, the comparisons of P L and flow patterns in the vaned diffuser showed that the matching optimization between the model B impeller outlet flow angle and diffuser inlet vane angle resulted in a better flow pattern in both the circumferential and axial directions of the diffuser, which leads to the P L3 reduction. The meridian velocity V m of model B was significantly increased at diffuser inlet regions and resulted in improvements of flow patterns at diffuser middle and outlet regions as well as pressure expansion capacity. Finally, the comparisons of P L and flow characteristics in the volute showed that the turbulence loss reduction in the model B volute was due to the flow pattern improvement at diffuser outlet regions which provided better flow conditions at volute inlet regions. The matching optimization between the diffuser and volute significantly reduced the turbulence loss in volute sections 1–4 and enhanced the pressure expansion capacity in sections 8–10.

A precisive calculation method of volumetric and hydraulic efficiency of centrifugal pumps

Performance Prediction of Centrifugal Pump Based on the Method of Numerical Simulation

Computational Fluid Dynamics-Based Pump Redesign to Improve Efficiency and Decrease Unsteady Radial Forces

Hydraulic Optimization and Loss Analyses of a Low Specific-Speed Centrifugal Pump with Variable-Thickness Blades

Automatic optimization of centrifugal pump for energy conservation and efficiency enhancement based on response surface methodology and computational fluid dynamics

Optimization of a Centrifugal Pump to Improve Hydraulic Efficiency and Reduce Hydro-Induced Vibration

Cavitation Performance Improvement of High Specific Speed Mixed-Flow Pump

High Efficiency and Low Pressure Fluctuation Redesign of A Centrifugal Pump Based on Unsteady Cfd Analyses

Characteristics of Volumetric Losses and Efficiency of Axial Piston Pump with Respect to Displacement Conditions

The Optimization of A Low Specific Speed Pipeline Pump

Design Method for Impeller of Centrifugal Pump With Guide Vanes Based on Oseen Vortex

Design Method Based on a New Slip-Diffusion Parameter of Centrifugal Pump for Multiple Conditions in Wide Operation Region

Optimization Calculation Method for Efficiency of Multistage Split Case Centrifugal Pump

Performance improvement of a double-suction centrifugal pump for water supply system based on energy loss analysis and cavitation behaviour prediction

Investigation on Inner Flow Quality Assessment of Centrifugal Pump Based on Euler Head and Entropy Production Analysis

Improvement Design of a Vertical Double-stage Self-priming Pump

Low Leakage and High Volumetric Efficiency Research of Seawater Plunger Pump

Investigation of CFD Calculation Method of a Centrifugal Pump with Unshrouded Impeller

Design and Improvements of Centrifugal Pumps with Low Specific Number of Speeds Based on Inner Flow Analysis

Numerical investigations on performance improvement mechanism of a high-power vertical centrifugal pump with special emphasis on hydraulic component matching

Design Method of the Outlet Width of Centrifugal Pump When Handling Viscous Medium